Forum Replies Created
-
AuthorPosts
-
zykanMember
sorry for the mix up. this thread was started by someone else long time ago. and he asked about the 16 sec reissue (stated in the first post). so i chimed in …
funny enough all my older big box ehx stuff works perfect. even sliders on the sequencer … only part i would love to find is the red momentary switch as in the instant replay and the super replay. both work but i would love use this to replace at least the recording switch in the 16 sec delay for smoother action … thanks againzykanMembera little like this:
zykanMemberthanks for the links !
but i need the a sliding switch with the cap? in a 90 degree angle.
(if you know what i mean). i desolderd the broken switch, took all meassurements and compared it with quite a lot of datasheets on mousser with no i will now stop bering a nerd about this and just use something that kind of fits closely.
cheerszykanMemberthanks !
i am far from hoping for spares but i hoped for part numbers, schematics etc
and i tried smallebear and a couple of other sites over the years – mostly without success.
just love my og ehx big boxes and try to maintain them carefully.
thanks for helping again !
best
matthiaszykanMemberdid that. two times … unfortunately i did not get any response. i wrote at least 10 times in the last years and never ever got any response actually. to be fair, it was always about rare, vintage pieces like a momentary push button for the super replay or drm 15 schematics etc
this slider switch drives me crazy because i tried several times with no luck. dpdt, 2 pole etc. i disabled the broken switch but – it was broken (: spent like an hour at mouser too …
i am close to stick in just any switch and cover the mess with some tape :ahhh:cheers !
zykanMembermany years later ….
same happened to me. need this switch and had no luck with ehx costumer service … mouser stacks hundreds of different dpdt slide switches of about the same size … any hints ?zykanMember2 years later …
may i ask if there is any progress in adding the clock in / out to the drm 15 ?
i also have the 2 outs plus bass out (using this does not cut the bass from the main out btw !?) and really would love to add a clock / sync in and out.
i have the old super space drum, super replay, sequencer with clock and so on … and planning to connect everything for a ultimate ehx drum arrayany info / help much appreciated !
cheers
matthias -
AuthorPosts