Forum Replies Created
-
AuthorPosts
-
zootsMemberQuote:I have a Synth 9 pedal that I use quite frequently blending the guitar in and out during particular songs. I currently have a wing knob on the blend knob to allow me to blend on the fly. I was wondering there is a mod I could do to modify the blend circuit to hookup a external expression pedal to allow me to blend the guitar in and out with the synth 9. Thanks
You could replace the DRY volume or SYNTH volume knobs with an expression pedal but instead of modding the pedal, you could just send the different outputs to different amps or to a mixer and use a volume pedal on the DRY volume to make those blend adjustments.
zootsMemberwhat is your DEPTH set to?
The expression pedal for the pitch mode works different than all the others. The DEPTH knob set counter clockwise will have the most prominent effect from the expression pedal and fully clockwise you won’t here any change the expression pedal is making.
All other modes higher DEPTH will have the expression pedal movement make more prominent changes in the sound. Also the RATE knob will adjust the pitch of the “un-whammied” signal but have no effect on the whammied sound. The RATE knob does not alter the sound on any other setting if (and only if) something is plugged into the EXP input
hope that makes sense. I love using expression with this pedal but it was a little counter intuitive at first.
I really wish EHX produced the multifx section was its own pedal too.
zootsMemberWhenever you freeze a sound the frozen sound will pass through the onboard effects (if activated) and the effects loop and your incoming signal will be clean
-
AuthorPosts
