Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Memory Toy Volume Boost Problem #119094
    yonie
    Member

    I got used to the volume change when engaged. Some other pedals like a tremolo might weaken the signal a bit, this pedal boosts it, it’s all good.

    What matters is that this pedal has been on my board all the time since I bought it (more than 3 years now), I basically have it engaged all the time with the blend low (9 o’ clock) for certain songs. The atmosphere it creates is very convincing.

    Way to go, EHX!

    in reply to: Memory Toy Volume Boost Problem #110513
    yonie
    Member

    FYI I mailed EHX support and recieved the following reply:

    “Hello.
    The volume boost is normal. We set it up so that when BLEND is set to 50%, there is no volume boost. As you turn Blend the volume changes, this is normal for a wet/dry control.
    All the units are the same in that regard.

    New Sensor”

    I need to doublecheck if this is indeed the case (no volume change at 50% setting).

    in reply to: Memory Toy Volume Boost Problem #110197
    yonie
    Member
    Quote:
    Quote:
    Hi,

    I also suffer from the volume boost that is there no matter what I set the blend to.

    I see there are 3 trimpots inside the Memory Toy. One is for the Modulation Depth. Could one of those others be for gain?

    If not, can i return the unit and get a replacement hoping that one won’t have the boost?

    Thanks,

    Ronald

    This is the reply i got from EHX when I asked about the volume issue.I ended up returning mine:

    “Hello. Unfortunately that is normal for this unit and there is no trim pot adjustment to lower the gain.
    Regards,”

    Thanks for the information. Did you get a replacement that did work?

    in reply to: Memory Toy Volume Boost Problem #110185
    yonie
    Member

    Hi,

    I also suffer from the volume boost that is there no matter what I set the blend to.

    I see there are 3 trimpots inside the Memory Toy. One is for the Modulation Depth. Could one of those others be for gain?

    If not, can i return the unit and get a replacement hoping that one won’t have the boost?

    Thanks,

    Ronald

    in reply to: Audible Memory Toy when switched off #109169
    yonie
    Member

    indeed the two boards were not fully connected! also i found a footpiece that i previously detached from the pedal stuck between the top board and the enclosure XD

    problem is now fixed, thanks a million.

    in reply to: Audible Memory Toy when switched off #109056
    yonie
    Member
    Quote:
    It is true bypass. That is not normal by any means for the Toy. I would exchange it for another or maybe pop open the pedal and make sure the two boards are connected (seems to be a common problem). You can search and probably find an answer to this somewhere!

    Thanks, I’ll give it a go and let you know if it helped.

Viewing 6 posts - 1 through 6 (of 6 total)