Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 6, 2009 at 10:11 pm in reply to: EHX Small Clone/Stone and Boss BCB-60 Pedal Board incompatibility #90210
    xreaper
    Member
    Quote:
    the one spot adapters work very well

    Update – I just picked up a VS 3.5mm adapter and it powered up both my EHX boxes as well as my TS-808 – thanks for all your help everyone!!

    ~X

    January 4, 2009 at 6:47 pm in reply to: EHX Small Clone/Stone and Boss BCB-60 Pedal Board incompatibility #90068
    xreaper
    Member
    Quote:
    Yeah, that’s what that is, an adaptor to change a boss type end to a 1/8 type, you should be fine using that with your exsisting power supply.

    Awesome, thanks for all of your help!

    January 4, 2009 at 1:37 pm in reply to: EHX Small Clone/Stone and Boss BCB-60 Pedal Board incompatibility #90060
    xreaper
    Member
    Quote:
    the one-spot adaptors are excellent, I use a few with my one-spot power supply and never had any problems, good luck. :thumb:

    Thx! One more bit of confusion – do you think I just need the 3.5 inch adapter, or do I actually need the 1-spot AC adaptor as well? My original thought was just a small adapter where one end would accept the boss BCB-60 power input and the other end would plug into my EHX pedals. Maybe that’s what this is, I can’t tell by the pictures!

    If I need the 1-spot power supply, then I suppose that would replace the existing supply powering up my pedal board?

    January 4, 2009 at 4:01 am in reply to: EHX Small Clone/Stone and Boss BCB-60 Pedal Board incompatibility #90053
    xreaper
    Member
    Quote:
    you mean one like this?

    http://www.sweetwater.com/store/detail/1SpotC35/

    It’s only dissapointing that everyone seems to consider the Boss type as standard now (especially power supply manufacturers) many companies have used the 1/8th as ‘standard’ before, EHX, Proco, Dod (pre-digitech), MXR (pre-dunlop)

    anyway, that a whole other arguement…..

    Tnanks for the link, looks promising.

    I don’t necessarily consider Boss type as standard, it’s just that’s obviously what the pedal board has and it would have been nice if they all fit! =) I have an old D.O.D pedal I pulled out which also accepted the Boss jack, so I guess I was thinking “argh, why can’t the others fit as well?!!”.

    Anyway, thanks again, i’ll let you know how it works out.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)