Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 19, 2009 at 12:43 pm in reply to: English Muff’n #93585
    Varindweion
    Member
    Quote:
    I didn’t like the smooth cylindrical stock knobs, so I changed them out with some vintage grooved ones. I also changed the screws that hold the tube guard down. I replaced them with a couple of the large head hand turnable screws that held the backs on some old pc’s.

    d

    Do they come of easily?

    ’cause I’ve got an LPB-1 (and I’m getting an EM shortly) and I want to get me some chicken head knobs to replace the stock ones. That’s easier to see the setting, on stage.

    January 5, 2009 at 8:24 pm in reply to: Double Muff? #90132
    Varindweion
    Member

    a question about the double muff.
    I’ve heard that it is an ‘egotistical’ pedal, being that you need to put it in the front of the chain.
    Does this is also include the switchblade and a tuner pedal?
    I want to by a DM and a SB and use it as follows:

    gitA or gitB -> SwitchBlade -> Boss TU2 -> Double Muff -> LPB-1 -> Dunlop Crybaby Wah -> amp(Fender Pro Jr.)

    Or should I place the TU-2 behind the Double Muff?

    January 5, 2009 at 8:15 pm in reply to: LPB-1 set up #90129
    Varindweion
    Member

    I’ve noticed, when using the LPB-1 with my Fende Pro Jr. that, if I play at a considerable amp level (let’s 5-6), I get an ‘anti-boost’ (i.e. lower volume) when I turn the LPB-1 below 10 o’clock. With the amp below 5-6, I get a great boost, with no extra overdrive, when I put the LPB-1 at 12 o’clock.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)