Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 1, 2016 at 11:58 am in reply to: V256 Vocoder reamping not possible #121944
    tomo766
    Member

    I just read in the manual that the v256 is 24 bit 36 kHz..maybe the recording would have to match this? As opposed to 44.1 or 48 etc?

    September 1, 2016 at 11:34 am in reply to: V256 Vocoder reamping not possible #121943
    tomo766
    Member

    & I’ve got a RME UCX. You’d use an XLR cable going from one of your outputs on your interface into this & out of the v256 into one of your inputs. I just worry I might blow something up. The XLR input of the v256 is 10 kilo ohms. So…your output would have to be in the acceptable range…I think..(line level?) …’what the hell’s a jigawatt!?’ It’s this gain staging thing again. :P

    August 31, 2016 at 5:06 am in reply to: V256 Vocoder reamping not possible #121922
    tomo766
    Member

    Hi,
    I’d like to do this too but like you, had no luck. I ended up getting a TC Helicon Voicelive Rack which had an instructional video on how to set it up for this ( pre recorded voice track put through it as opposed to live singing ) It has something to do with gain staging from memory. Having seen the video I think it should be possible with the v256 too. Some help with this would be great as it would open up a whole new dimension of creative recording possibilities in the studio.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)