Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 4, 2023 at 4:55 pm in reply to: EHX 95000 tempo inaccurate #205140
    tobyharrixon
    Participant

    So I use Ableton mainly and am not entirely sure how I would do this. Will look into it. But if you know how to do this either in Ableton or another DAW please do let me know

    October 4, 2023 at 11:53 am in reply to: EHX 95000 tempo inaccurate #205123
    tobyharrixon
    Participant

    Ok got you. The initial post of this thread mentions that using an external clock produces the same result, so I presume that isn’t a work-around?

    Rounding up/down the BPM of the DAW to the closest decimal does come close but when zooming in on the end of the audio clip I can see that it does not align with the line in DAW arrangement window indicating the end of bar.

    October 3, 2023 at 3:51 pm in reply to: EHX 95000 tempo inaccurate #205114
    tobyharrixon
    Participant

    Some examples:

    Record:
    Tempo= 130.01179 bpm (59 to 240)
    QUANTISE= On (Off or On)
    STEREO= Off (Off or On)
    Last Play:
    TEMPO POT= 567 (0 to 1023 or blank)
    OCTAVE= Off (Off or On)
    REVERSE= Off (Off or On)
    BEATS= 4 (1 to 8 or blank)
    TAP TEMPO= 0.00000 bpm (59 to 240)
    TAP ADJUST= 0.00000000 (0.5 to 2.0 or blank)

    —-

    Record:
    Tempo= 130.01179 bpm (59 to 240)
    QUANTISE= On (Off or On)
    STEREO= Off (Off or On)
    Last Play:
    TEMPO POT= 553 (0 to 1023 or blank)
    OCTAVE= Off (Off or On)
    REVERSE= Off (Off or On)
    BEATS= 4 (1 to 8 or blank)
    TAP TEMPO= 0.00000 bpm (59 to 240)
    TAP ADJUST= 0.00000000 (0.5 to 2.0 or blank)

    —-

    Record:
    Tempo= 100.37936 bpm (59 to 240)
    QUANTISE= On (Off or On)
    STEREO= Off (Off or On)
    Last Play:
    TEMPO POT= 620 (0 to 1023 or blank)
    OCTAVE= Off (Off or On)
    REVERSE= Off (Off or On)
    BEATS= 4 (1 to 8 or blank)
    TAP TEMPO= 97.16510 bpm (59 to 240)
    TAP ADJUST= 1.04449462 (0.5 to 2.0 or blank)

    —-

    I’m still new to using it but I set the final tempo using the internal slider, however I may have tapped some tempos prior to that and then adjusted (which I think the tap adjust value indicates?). Was not using an external MIDI clock.

    Thanks for your prompt reply. Love the looper regardless – but figuring out the above would be incredibly convenient.

    October 2, 2023 at 6:59 pm in reply to: EHX 95000 tempo inaccurate #205110
    tobyharrixon
    Participant

    Hi, please could I get some help with same issue. DAWs only offer .0000 for BPM, but BPM data from 95000 is .00000

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)