Forum Replies Created
-
AuthorPosts
-
December 29, 2020 at 11:25 pm in reply to: Please update the EHX 95000 looper to have variable loop lengths: #126706TacklingDummyMemberQuote:Apparently it isn’t possible even if they wanted to
I come back ever so often with my fingers crossed that they’ve added this feature.
TacklingDummyMemberQuote:Hey, thanks for replying! Honestly this is the kind reply I was hoping for! I tested the pedal both in my super quiet signal chain with my other pedals AND as the only pedal between guitar and amp. Tried it with different guitars and pickups, both in stereo and in mono. The hiss is the same. Dead silent in bypass, hissy when switched on.
I only used the EH power supply that comes with the pedal.
I’ll follow your advice and contact the techs on Monday. If it’s confirmed that the pedal is not meant to be hissy at all, I will get in touch with the UK supplier I got it from and ask for a replacement. The pedal itself is a stunner, it would be really sad if such a quality little unit was ruined by all that hiss! Especially a delay pedal, that is supposed to shine in clean and quiet parts….
Fingers crossed.Any updates? I have notiiced the same.
April 30, 2019 at 1:19 am in reply to: Please update the EHX 95000 looper to have variable loop lengths: #125159TacklingDummyMemberQuote:Quote:This is the reply from EHX support regarding this question:“The 95000 does not allow for different track lengths within a single loop. All track lengths are always identical within a given loop. This will not change with future firmware upgrades.”
Well then, it appears I’m done fawning over the EHX 95000. Thanks for getting to the bottom of it!
I should add, I wasn’t happy with the Headrush Looperboard FW 1.01 either, for a list of reasons. I returned it after 6 days of noodling. It’s more limited than you’d imagine a stand-alone full-blown looper should be. I’ll revisit it after future firmware updates.
To date, my favorite looper is Quantiloop on the iPad with a kiddo controller. I just do t like the form factor. If Quantiloop was on a stand-alone device, it would be perfect.
April 23, 2019 at 3:19 pm in reply to: Please update the EHX 95000 looper to have variable loop lengths: #125136TacklingDummyMemberQuote:This is the reply from EHX support regarding this question:“The 95000 does not allow for different track lengths within a single loop. All track lengths are always identical within a given loop. This will not change with future firmware upgrades.”
Well then, it appears I’m done fawning over the EHX 95000. Thanks for getting to the bottom of it!
April 21, 2019 at 10:50 pm in reply to: Please update the EHX 95000 looper to have variable loop lengths: #125127TacklingDummyMemberQuote:Wow- that’s it. I wonder if I am still in my return window for this pedal.Thanks for the tip!
It’s not perfect either, but definitely looks like it could be a winner. I picked up one Friday. Bulky, Effects are strangely implemented. But fun.
April 21, 2019 at 8:34 am in reply to: Please update the EHX 95000 looper to have variable loop lengths: #125125TacklingDummyMemberQuote:Are we going to hear back on this? Is the forum even moderated?I’ve been holding back writing a review for this pedal based on a response to this question.
Don’t hold your breath.
Have you checked out the new Headrush Looperboard?
December 23, 2018 at 1:46 pm in reply to: Please update the EHX 95000 looper to have variable loop lengths: #124652TacklingDummyMemberHave there been any firmware updates to address this?
May 28, 2018 at 1:58 am in reply to: Please update the EHX 95000 looper to have variable loop lengths: #123937TacklingDummyMemberQuote:This and the ability to play the tracks sequentially…Please!
I haven’t purchased the 950000 and info, update release notes are difficult to come by.
Fingers crossed.
May 25, 2018 at 3:27 am in reply to: Please update the EHX 95000 looper to have variable loop lengths: #123934TacklingDummyMemberBump this!
March 28, 2018 at 8:59 am in reply to: Please update the EHX 95000 looper to have variable loop lengths: #123746TacklingDummyMemberIneas really hoping someone had come to tell me the feature was added. Dang.
February 11, 2018 at 5:16 pm in reply to: Please update the EHX 95000 looper to have variable loop lengths: #123581TacklingDummyMemberI’d take a Boomerang Rang 3 with a memory card capability or an RC-300 refresh, too!
-
AuthorPosts
