Forum Replies Created

Viewing 7 posts - 16 through 22 (of 22 total)
1 2
  • Author
    Posts
  • April 29, 2013 at 3:08 pm in reply to: Im I the only one who was dissapointed with the Memory Toy? #118981
    StubbornBard
    Member

    I own one and I love the little thing. Sounds great to my ears. My only other delay pedal I’ve owned was a Line 6.

    April 29, 2013 at 2:56 pm in reply to: My new Hum Debugger #118980
    StubbornBard
    Member
    Quote:
    … works pretty awesome on the Stratocaster. Now I must stop buying. You can’t tempt me to upgrade my Small Stone to a Stereo Polyhase. Uh-uh, ain’t gonna work.

    So it eliminates the hum from switch positions 1 and 5 completley? Does it only silence the hum during pauses, or does it also silence it during play?

    April 29, 2013 at 1:50 pm in reply to: order all the EHX pedals you’ve owned from favorite to least favorite #118978
    StubbornBard
    Member

    This is a tough one, but here I go.

    Octave Multiplexer
    Germanium 4 Big Muff
    Freeze
    Holy Stain
    Metal Muff
    Clone Theory
    Memory Toy
    Neo Mistress

    Still own them all and they are basically what makeup my board. Other than a volume and wah by other companies.

    April 28, 2013 at 8:39 am in reply to: Constant Noise using Pedals #118972
    StubbornBard
    Member
    Quote:
    something that did it for me was taking a wire, touch it to and tape it to any metal in my rig (metal chassis, 1/4″ metal cable) and the other end in the ground of an outlet. made it go from really loud buzz to nothing but guitar. try it out but make sure to put it in the ground on the outlet. if you hit hot, it could cause alot of problems

    Hey man. Thanks for the tip. I was able to fix my problem already though. My Metal Muff and Octave Multiplexer were the problems, they required using the EHX 9.6v vs the regular 9v, they both made a ton of noise using just a 9v adapter.

    April 28, 2013 at 6:41 am in reply to: Constant Noise using Pedals #118970
    StubbornBard
    Member

    Well I resolved my problem. I tore my entire board apart and hooked up each pedal one by one. Come to find out, the Metal Muff and Octave Multiplexer both require the 9.6v ac adapter or they will make tons of noise. All my other EHX pedals worked fine with the standard 9v wall warts. The Clone Theory did get a little noisier using the 9v but not much. Did some adapter rearranging and all is well now. I’m ordering 9.6v adapters for the rest of my EHX pedals just to be completely noise free.

    Pedals setup:
    Morley Volume 9v
    Dunlop Cry Baby Wah 9v
    Octave Multiplexer 9.6v
    Metal Muff 9.6v
    Freeze 9v
    Holy Stain 9v
    Clone Theory 9v
    Memory Toy 9v
    Nano Mistress 9v

    Hope this helps someone else.

    RadioShack 9v 300ma adapters + EHX Pedals = Noise Hell

    April 28, 2013 at 2:24 am in reply to: Constant Noise using Pedals #118969
    StubbornBard
    Member

    Now I’m completely stumped. I bought a battery backup, charged it, unplugged it from the wall, and ran my amp and 2 pedals completley off of the batteries and I still have the noise problem. So it’s not my houses power that’s causing it. Any help?

    April 27, 2013 at 11:18 pm in reply to: Holy Stain Fuzz Sound #118968
    StubbornBard
    Member

    The best recommendation I’ve gotten was a Germanium 4 Big Muff Pi from EHX support. Haven’t been able to try one out yet. Anybody here have one?

  • Author
    Posts
Viewing 7 posts - 16 through 22 (of 22 total)
1 2