Hello! Sorry for the thread necromancy but I wanted to post some information for anyone who comes looking for this topic on the xo version of the pedal as I found a real lack of resources on how to remedy the flange mojo throughout the net.

Pot Information for modifications for more jet flange.
R12 [top left trim pot]: Bias “headroom” (I set mine for 7 o clock).
R34 [bottom left trim pot]: Delay time for the effect signal/doubling (I set mine for 9 o clock)
R13 [bottomr right trim pot]: Flange sweep ( I set mine for 10 o clock)
R15 [top right trim pot]: Flange tone “jet whooasssshhhhh” (I set mine for 12 of clock)

I’m not sure what the reproducibility across different pedals for this is, so use these settings as a guideline and rely on your ears as you make changes.

Adjust these things slowly as it will self oscillate quickly and hoo boy is it loud. Refine as needed to reduce weird clock hiccups.

Set your and rate to 8 o clock and roll in the color knob to flange cityyyyy. The only real drawback is that getting the jet flange results in a noise floor tradeoff even with the EHX adapter. Totally annoying for recording.