Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 14, 2011 at 3:53 pm in reply to: The What Is The Current Draw For That EHX Pedal Thread #116525
    Shane
    Member

    Thanks again for the info Flick! You’ve been a big help! I’ll give it a go with room to spare on each output.

    December 14, 2011 at 12:39 am in reply to: The What Is The Current Draw For That EHX Pedal Thread #116519
    Shane
    Member

    That’s what I thought, thanks Flick! I’d be running a holy grail + in the other 250 mA output and some muffs in the sag outputs. Is the older big box version of the Multiplexer the same 11 mA as the newer version? I’m trying to work 15 pedals on one board (yes I’m a pedal junkie) and wanting to give my self room in the mA department on all outputs(PP2) as to not overload anything. Do mA rates ever change or should I say spike above the normal rates? I’m trying to give myself at least 20-30mA’s per outlet to spare. Thats a little closer than the normal 9v wall worts(ehx,boss,dunlop,etc) safety range(200mA average). Thanks again

    December 13, 2011 at 6:54 pm in reply to: The What Is The Current Draw For That EHX Pedal Thread #116513
    Shane
    Member

    Ok, thanks for the quick reply. Would I then be able to daisy a couple pedals such as the Pulsar and Small Clone old box, as long as I stay under the 250ma rating for that output? Echo=190 Pulsar=17 Small Clone=10 etc.? Thanks

    December 13, 2011 at 5:26 pm in reply to: The What Is The Current Draw For That EHX Pedal Thread #116509
    Shane
    Member

    I’m having a tough time trying to locate the #1 echo’s ma current. I’m wondering if I can run it off of one of the 100ma outputs on my PP2 or do I need to use one of the 250ma outputs like my holy grail plus?? Thank You for any answers

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)