Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 2, 2013 at 8:28 am in reply to: 1978 non-deluxe 18V Electric Mistress: is 12V acceptable? #118885
    saratov-tubes
    Member
    Quote:
    I own a 1978 non-deluxe 18V Electric Mistress.
    I am currently assembling a new pedal board, powered by a Carl Martin pro power DC supply, which has 9V and 12V outputs.
    Do I have to use 2 of the 9V outputs with a Y cable and adequate polarity invertor, or would it be possible to use 12V output directly to power the Electric Mistress, since 18V is converted to 12V internally.

    Has anybody ever tried this?

    Thanks in advance for any advice,
    Yann

    Misress needs 18V. It won’t work with 12V, but it’s OK to try to use Y cable with two 9V to get 18V. If the 9V outputs are isolated you should be fine.

    April 2, 2013 at 8:17 am in reply to: Deluxe Electric Mistress noise / hum / buzz? #118884
    saratov-tubes
    Member

    Hi All, I think you new a recap job on these old units. Consider contacting Howard Davis or your local tech on this job.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)