Forum Replies Created
-
AuthorPosts
-
samdiMemberQuote:Sorry! please contact the techs at
info@ehx.comOk! Thank you
samdiMemberInteresting
Thank you for your time!
samdiMemberQuote:Right, no balanced cables into the 1/4″ input of the 95000 TS only. If you want to use a balanced cable, it must be XLR into the 95000’s XLR inputs.First time I hear of this.
What sorts of problems does it bring?
samdiMemberQuote:This is very strange. We have definitely connected synths directly to the 95000, although not the Microbrute. Are you using a standard TS cable when you connect the synth to the 95000? The 1/4″ input on the 95000 must be made with a TS cable, TRS cables will cause problems.If you are using a TS cable, try different settings of the synth’s volume knob and the 95000’s input gain knob.
Issue has resolved itself and i’m not sure how or why. I hadn’t changed anything but decided to try a different TS mono cable, and a friend recommended i try and lower the master on the synth. So i should have tried both things separately but i did them at once and the sound came through without issues almost as if I never had a problem to begin with.
Once i got the sound i tried pushing it to see if it would blank out past a certain threshold, but all i got was clipping (red light overdriven preamp distortion etc).
But interesting to hear about the TRS thing. So balanced cables aren’t recommended?
samdiMember.
-
AuthorPosts
