Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 3, 2020 at 4:24 pm in reply to: How do i load my own drum loops to 95000?? #126141
    Reddog
    Member

    I have not done it yet. The manual sez it has to loaded onto the card as a .wav file. Connect to your computer with a usb cable. Or just record it as a track.

    June 3, 2020 at 4:15 pm in reply to: MIDI Foot Controller for 95000 Looper #126140
    Reddog
    Member

    Hello all. I reread your posts. I do not have actual experience doing the functions you both want done.

    It has been my experience that all of the functions listed in the midi spec might not work with the numbers listed. Sometimes I have to do some experimenting and send different numbers. Some controllers start there numbers at 000 and some like the fcb1010 start with 001.

    If the midi spec says it will do a specific function, most likely it will do it.

    A large hurdle to overcome for me was learning how to program the fcb1010. That would have been the same with any midi controller.

    I hope this helps.

    June 3, 2020 at 4:04 pm in reply to: MIDI Foot Controller for 95000 Looper #126139
    Reddog
    Member

    I am using the fcb1010 with my 95000. The 95000 has a very good midi implementation. The only problem I am having right now, is not all of the cc are correctly labeled in the chart. The pc had to have a 1 added to the numbers. It also took me about an hour to figure out the terminology for the fcb1010. Of course the windows programmer would not recognize the midi port on the computer.

    I really like having a foot controller. I think the 95000 makes a better tabletop unit. I plan on using it live for the first time on Thursday.

    June 3, 2020 at 3:49 pm in reply to: Anybody got Mel 9 tips? #126137
    Reddog
    Member

    I use it for background swells. I get the best sound when I pluck the string.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)