Forum Replies Created

Viewing 15 posts - 31 through 45 (of 146 total)
  • Author
    Posts
  • in reply to: NAMM & Musikmesse #97454
    puretube
    Member

    ooops – I thought I had tried to stay out of the view of the camera…
    (or was that on the same occasion, last year?)

    in reply to: Got new tubes for my Wiggler #97453
    puretube
    Member

    somewhere on the web, there`s a mod to increase or decrease the gain of the Wiggler`s first tube
    (the right hand one, on the side of the input-jack…), IIRC.

    Otherwise, you could lower the vol of the guitar, or the device before the Wiggler,
    and make up the volume with the Wiggler`s control.

    in reply to: EHX Hot Tubes: Best type/make of 12AX7s to use? #97452
    puretube
    Member

    Just stay on the low side of the “Gain”-knob, to tame them!
    (turning left is NOT a sign of weakness…)

    NOS Telefunken or Siemens ECC83 will work nicely, too.

    in reply to: English Muff’n #95419
    puretube
    Member
    Quote:
    Does this pedal run the tubes at high voltage like the hot tubes?

    Yes.

    in reply to: MEMORY BOY??? #95376
    puretube
    Member

    I want a “DeLuxe”-switch…

    in reply to: Who’s coming to Musikmesse ’09? #95332
    puretube
    Member

    The rest of my MusikMesse-pix are over there:

    in reply to: Holy Grail: Now In Diecast Chassis #95331
    puretube
    Member
    Quote:
    Memory Boy, Riddle, and Enigma were not there AFAIK

    Right you are! confirmed. :)

    in reply to: Holy Grail: Now In Diecast Chassis #95272
    puretube
    Member
    Quote:
    WOW – you got all the goodies!

    It ain`t me, babe…

    That`s Felipe`s shoes there in the MusikMesse “ToyRoom”.

    My good friend Felipe Souza demoes the pedals since years, in Frankfurt…

    e-h1883.jpg

    e-h1822.jpg

    e-h1823.jpg

    in reply to: Holy Grail: Now In Diecast Chassis #95270
    puretube
    Member
    Quote:
    Were the enigma, riddle, and memory boy being demo’d?

    I take it you made the memory mini?

    Those first three where NOT demoed,
    the latter was made specially by me for April, 1st. …

    in reply to: Holy Grail: Now In Diecast Chassis #95269
    puretube
    Member
    Quote:

    The question I have is when can I get my hands on one?

    AFAIK, they are on the way to the shops…

    in reply to: Holy Grail: Now In Diecast Chassis #95268
    puretube
    Member
    Quote:
    Quote:
    Not on a daisy there.

    You need to get a real power supply with some nice isolated outlets McHaven. It’s the 21st century!

    I’m not interested in paying over 100 dollars for a PP2+ when none of my pedals require an isolated output. The PP2+ can’t even power my Polychorus or Micro Synth, so I see absolutely no reason to spend the money on a power supply that won’t offer me any necessary features when the OneSpot perfectly satisfies my needs.

    Also, GAS for that Mole!

    Release it already!

    Took a closer look at the wiring yesterday: the nano GRAIL in deed was daisychained!

    AFAIK the MOLEs are out now…

    in reply to: ALL TUBE BAD STONE #95267
    puretube
    Member
    Quote:
    Quote:
    The only clip where it may appear oughtta be this one from the H-C
    MusikMesse-report 1999,

    I’m hearing the Tube Zipper in there as well ;) Awesome! Somebody needs to record an album with those pedals, Puretube. They need to be heard.

    That`s why E-H started to produce them…
    (partly)

    in reply to: ALL TUBE BAD STONE #95261
    puretube
    Member

    The only clip where it may appear oughtta be this one from the H-C
    MusikMesse-report 1999,
    where the then owners of H-C played a funny mix through this setup:

    pedals-large.jpg,

    so there is a chance that the phasey content of the clip might as well derive from the
    TUBE-WAHBRATO:

    T-WAHBRATO20cor2.jpg

    which in turn actually is a “plus”-version of the TUBE-PHASER,
    i.e. also a 6 stage device with switching possibility from phaser to vibrato, tremolo and modulated (= auto)
    TUBE-WAH (R) – comparable to the “WORM” which is a 3-stager… –
    and combinations thereof…

    in reply to: 16 Second Delay Slide Switches #95246
    puretube
    Member

    info @ ehx . com

    in reply to: 9V Pedal Board Power: to a Hum Debugger and a 2880? #95245
    puretube
    Member

    Hum-Debugger ONLY with it`s OWN supply !!!!!

    :poke:

Viewing 15 posts - 31 through 45 (of 146 total)