Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 6, 2013 at 12:50 pm in reply to: 2880 not responding to SPP while playing #119479
    neurone
    Member

    J’ai déjà posté sur audiofanzine pour le meme problème

    November 6, 2013 at 12:47 pm in reply to: 2880 not responding to SPP while playing #119478
    neurone
    Member

    C’est sympa d’avoir de l’aide en français en plus!
    Je ne sais pas comment on fait des message privé mais, oui je veux bien de l’aide si tu pense pouvoir m’aider a résoudre le problème.
    MERCI

    November 5, 2013 at 10:55 am in reply to: 2880 not responding to SPP while playing #119473
    neurone
    Member

    Merci, je suis bien français.
    J’ai déjà essayé avec d’autres machines en maitre avec la 2880 ça marche pas, et franchement je me suis acharné, pour moi c’est sur ma 2880 déconne a mort.

    May 29, 2013 at 7:45 pm in reply to: 2880 not responding to SPP while playing #119118
    neurone
    Member

    Hello, i’ve got same kind of problem with the ext clock of the 2880, it just don’t want or can’t sync with any device.
    I think there a defaults on some 2880.
    Nobody answer to me so good luck!

    August 13, 2012 at 6:11 pm in reply to: 2880 ext clock synchronization problem #117999
    neurone
    Member

    I’ve try these combination:
    esx (master)+ 2880(slave) ext clock and quantize actived : nothing run
    kaoss pad3 (master)+ 2880 (slave) ext clock on and quantize actived : nothing run
    tr 505 (master) + 2880 (slave) ext clock on and quantize actived : nothing run
    2880 (master) + esx (slave) : no problem

    I’ve load the new os, change the midi cable, try all midi channels and nothing change, the problem persist.

    Have you an idea of what can i do?
    Thank you!

    August 12, 2012 at 11:51 pm in reply to: 2880 ext clock synchronization problem #117994
    neurone
    Member

    In fact i fail use the 2880 in slave. My esx is configured “master”, the clock is set to “int”, the midi channel 1 same on the 2880. When I run play with esx as master and the 2880 ext clock mode, it does not reacted as if he was blocked. It is impossible to play and if I change the tempo on the esx, the 2880 does not answer either.
    I tried with my KAOSS PAD3 it’s the same it does not work, yet I use it already in a master for roland mc09 it works … What to do?

    August 12, 2012 at 10:17 pm in reply to: 2880 with MC-505 midi clock error #117992
    neurone
    Member
    Quote:
    I changed the midi channel on the 2880 and there’s no difference. It still gets jacked from the MC-505.
    I was able to rewire Reason with ProTools and drive the 2880. Ran good.
    If you have any other suggestions please keep them coming.
    Thanks! ~J

    At this point…
    -Every device (Korg ESX1, Microkorg, Computer DAW) slaves good from the MC-505 clock except the 2880.
    -The 2880 slaves good with every device (Korg ESX1, Computer DAW) except for the MC-505.

    Maybe I could do a “midi over ip” and EHX can analyze the MC-505 signal..?

    I have a similar problem, except it’s the esx-1 I can not seem to synchronize with the 2880. How you configure your esx-1 so that it works?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)