Close enough to not give a fuck anyways hey!

You cant get replacement parts for it from any stores.

Them two tabs are not part of the switching and are irrelevant.
Also, the pinout of the sovtek switches is not the same as standard DPDT switches.

It doesn’t go like this: (so wiring it as per normal DPDT will result in a pedal that will not work)

14
25
36

So you’ll have to use a 3PDT and wire like this diagram below.

Don’t forget to cut the trace between input jack and effect input.

This diagram provides all the information you need to true bypass it. You’ll need two big washers that you use to mount the new smaller switch the the inside chassis plate as the hole is obviously too big to mount a 3PDT.

http://i1016.photobucket.com/albums/af286/fenderamerica/Pedal Schematics/CCCPBIGMUFFTBD.png

Essentially, you are doing this to it and the end result should look like this:

The bypass is normal and tru bypassing it will fix it.
With my opamp muff the more you turn it up the less apparent the gain increase becomes due to saturation. At lower levels the difference is very noticeable. However it does have the right amount of gain for what it is. Yours may be normal I dont really know without hearing it.

Seriously, I’m poor as shit and on the doll! But once I get something in my head, I keep at it till I get it…saving does wonders…actually,hoarding your money does more!

Almost every bit of gear I have I have bought on the doll…my vintage mustang, my jaguar my twin reverb etc etc.

You can own almost anything if you just save! And considering there’s only three more pedals I’m buying, and they aren’t expensive, i will have no problem saving for it.

And some shocking news: I’m not buying big muffs anymore, I figure the 13 I have is overkill so I’ll leave it at that….unless i see a stoopidly cheap deal on a early 90’s sovtek or something then i’ll make an exception, but if that doesn’t happen, my muff collection is finished AFAIC! I have the best of the best muffs so anything else is a downgrade IMO!

I have to admit I don’t have a good impression of the MT whatsoever! I have read basically nothing but complaint after complaint about it….usually I would just ignore this kinda thing because people complain about nothing a lot but I’m starting to think there’s something to it and that it has an inherent design flaw….. it hasn’t been out long and I have read at least 30-40 complaints about it on various forums, all very similar. This is the first opposite complaint I’ve heard of though.

I bought my first one on the sole reputation that Mudhoney used one,I never even heard it (aside from on Mudhoney records)…I just “knew” it would be good and thought any pedal that looks that cool has to sound good.
13 muffs later and I still haven’t been proved wrong! 😆

There’s a way to decrease gain easy enough but it still involves removing and replacing resistors.
Read my article here:http://sovtek.webs.com/bmpgainfactor.htm