Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 25, 2019 at 6:38 pm in reply to: 95000 increasingly gets louder during playback #124881
    Myke8
    Member

    I have yet to see the clip lights come on at all on the 95000. In fact I have tried to get them to light up just to see if they actual work but nothing yet. Input level knobs were about half way. I will try going straight into the 95000 and see how that works. I am seeing clipping on my mixer and p.a. head as well.

    February 22, 2019 at 10:34 pm in reply to: 95000 increasingly gets louder during playback #124868
    Myke8
    Member

    @Flick. The loops are sounding much better although It seems my signal is still very hot. I am using a Shure Beta 52A (Kick Drum) and a Shure SM57 (Overhead) Are the mic pre amps in the 95000 capable of handling those two mics? (I have pre amps in my Yamaha mx06x mixer as well) I am going straight XLR would maybe a XLR > 1/4 in adapter help with the signal not being so hot? I am routing :Mixer>95000>Mixer>PA. Thanks for all the help, this is an interesting venture :

    February 5, 2019 at 11:15 pm in reply to: 95000 increasingly gets louder during playback #124801
    Myke8
    Member

    Seems to be much better. I am recording mono and was possibly layering too much onto one track. Thanks for your help

    February 2, 2019 at 3:36 pm in reply to: 95000 increasingly gets louder during playback #124795
    Myke8
    Member

    @flick. Thanks for chiming In. I am using both xlr inputs for two separate mics and the dry levell and volume was less than half way . Routing is xlr into a mixer then XLR out from mixer back into the 95000. Then taking mono 1/4 out from 95000 back into the mixer then XLR from Mixer out into PA.

    Added info here. I am a percussionist . The mixer is feeding the live percussion sound into the looper and looper output is fed back into the mixer so I can play on top.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)