Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 16, 2011 at 9:21 pm in reply to: Big Muff Wicker volume issue #116035
    mobkon
    Member

    Geez…a month later and still no replies?

    Anyone????

    August 9, 2011 at 2:18 am in reply to: LPB-1 Nano buzzes like crazy on one of the inputs #102333
    mobkon
    Member
    Quote:
    I would use either some silicone or hot glue. Definitely not super glue. You may also need to touch up the solder connections on the pot.

    Any kind of specific silicon? That will probably be what I’ll use since I don’t have a hot glue gun.

    August 9, 2011 at 1:52 am in reply to: LPB-1 Nano buzzes like crazy on one of the inputs #103140
    mobkon
    Member

    Realized what the issue is. The pot has come un-glued from the board and is causing the connections to be lose. Therefor, when the pot knob is fasted to the case, jiggling the cable moves the board a bit and makes those connections.

    SO, what I need to do is re-attach the pot to the board. What’s the soft clear glue thats used? What else can I use? Will super glue work?

    Thanks!

    August 5, 2011 at 2:30 pm in reply to: LPB-1 Nano buzzes like crazy on one of the inputs #106927
    mobkon
    Member
    Quote:
    yeah you need to remove the board to get to all the solder on the other side.

    BUT…be very very careful! in order to remove the board you need to remove the knob and unscrew the pot on the front of the unit. unfortunately these new knobs are pressed on and not ment to be removed, there for, many people carelessly trying to remove the havem also broken the pot as well!!!

    Thanks for the tip. Though I’ve removed the board a few times already to inspect it for the problem. I’ll remove it again tonight when I get home and look at the solder joints.

    If thats not it, is there a place to buy a replacement part?

    August 4, 2011 at 3:01 pm in reply to: LPB-1 Nano buzzes like crazy on one of the inputs #101587
    mobkon
    Member
    Quote:
    I would guess that either the jack is cracked or the solder joints on it need to be redone.

    I can resolder it, I just can’t find any solder joint for it. Any idea where it would be?

    July 12, 2011 at 12:50 am in reply to: My Big Muff Wicker is a noisy beast! Can I tame it??? #115853
    mobkon
    Member

    32 views and no reply? geez. :(

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)