Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 4, 2020 at 10:28 am in reply to: New 22500 Looper Frozen #126396
    Martyn Unit 8
    Member

    Morning

    I have completed the SD process as before with a brand new SD card I had, and unfortunately I’m still getting crackle/distortion and non-sensical flashing of LEDs as before, so I will contact my supplier for the next stage.

    Cheers for the advice. Much appreciated.

    Martyn

    September 3, 2020 at 4:06 pm in reply to: New 22500 Looper Frozen #126394
    Martyn Unit 8
    Member

    Hi, I am powering the unit with the power adaptor which came with the unit.

    OK so I will try tomorrow with a new SD card. And if that does not work I shall talk to my supplier (GAK in Brighton, UK), I have already made them aware of the situation.

    Cheers

    September 2, 2020 at 10:41 pm in reply to: New 22500 Looper Frozen #126392
    Martyn Unit 8
    Member

    HI there, thanks fr the advice.

    So:

    I did a full format overwrite, took a while as noted.
    DL the most recent firmware
    DL the 16 Loop Rhythm beats.

    SD in and power on. Tried a loop on one of the banks.
    The Trigger didn’t seem to work (set on 85). So I tested with taking the trigger off.
    It appeared to work but played back the riff without much sound clarity and a lot of crackle/distort.
    Then all the LEDs went off, it moved to bank no 7 from 20(I think).
    Apart from the Bank red LED, but nothing else lit and when I press/spin the mode button it does not flash or change modes.

    Please can you confirm I have done the correct procedure with the SD, unless I should try a new/different one? Otherwise I feel this could be a faulty unit.

    Many thanks
    Martyn

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)