Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 3, 2010 at 6:31 pm in reply to: EHX Mod Pages #111785
    maibanez
    Member
    Quote:
    not that its complicated, it just dont make much sense. just make a blend pedal in its own box, then you can move it around and use it in other places if you wanted to and you dont need to ruin your BM!

    I like the option to have a clear channel when I play the bass especially when I go to studio or live when I use a bass amp I do not know (in genereal is very cheap and has a sound you use all night trying to improve or very advanced bass amp and you have no idea how it will react with your pedal) like the bass big muff, but I prefer the distortion of the little big muff is better or I like it more than the bass big muff distortion, the big bass muff has a tendency to sound like mud, but the little big muff is stolen too much bass…

    I play a lot on different projects, and only bring with me my bass, a tuner and a fuzz …. I need not carry much weight and do not wish more pedals, so I’d like to keep it that way …..

    October 2, 2010 at 10:04 am in reply to: EHX Mod Pages #111758
    maibanez
    Member
    Quote:
    Quote:
    I have been speculating the possibility of the modify the little big muff and make a bridge between the input jack and output jack for a get a clear channel, and use the volume as a blend, the idea is to do the same as the bass big muff …. I play guitar and bass and use the little big muff for both …. my question is, how can I do it? there are some precautions that I should take? … can I use the volume as a blend ?…. what are the bedst materials should i choose to use?…. have you some recomendation???…etc etc etc

    Save yourself some trouble and buy/build a blend pedal.

    why??? is to complicated??

    how about the old new BM USA…???

    October 1, 2010 at 11:09 pm in reply to: EHX Mod Pages #111752
    maibanez
    Member

    I have been speculating the possibility of the modify the little big muff and make a bridge between the input jack and output jack for a get a clear channel, and use the volume as a blend, the idea is to do the same as the bass big muff …. I play guitar and bass and use the little big muff for both …. my question is, how can I do it? there are some precautions that I should take? … can I use the volume as a blend ?…. what are the bedst materials should i choose to use?…. have you some recomendation???…etc etc etc

    May 15, 2010 at 1:29 pm in reply to: FAQ: My pedal needs repaired and is still under warranty. What do I do? #102704
    maibanez
    Member

    I have a #1echo, it don’t work anymore, check the power and it work fine, i take the pedal out of my board and wen the pedal is of i have sound from my amp, but wen is of no….. the light is on but no sound

    i not have warranty and I have a little bit of knowledge of electronics

    what can i do?
    what could be?

    December 15, 2009 at 8:59 am in reply to: pedal order ? #105380
    maibanez
    Member
    Quote:
    Guitar Or Bass
    Tuner
    Bass Balls
    Octave MultiPlexer
    Wah
    Muff
    Small Clone
    1echo
    Volume

    one reason why you may have lost volume, could be where you put your tuner (sometimes)
    it needs to be right at the start or right at the end.

    the 1echo is known to lose volume when engaged no matter what setting you have it on, some are lucky and dont have this but 90% do. thats why i suggested putting the volume where i did, so if you have it set at a certain level for normal stuff and then when you kick on the 1echo, you can change your volume level to match your original signal.

    you could also try the octave multiplexer after the muff, im not too familiar with that pedal, but everything is in what i believe is th right order

    THX…….. I Try It

    December 9, 2009 at 6:34 am in reply to: pedal order ? #105053
    maibanez
    Member
    Quote:
    Pedal order….

    The most of my pedals are ehx… but every time i mix a echo delay with fuzz i lost volume or phaser and fuzz or octave and fuzz… there are some they say my order is wrong, I have a USA Big muff, Russian, little big muff, bass big muff, metal muff, with the metal muff and Big muff USA and the Russian that is not the case but with the other ones I lost volume

    Amp<
    Echo#1<
    Small Clone<
    (Sometime) Tuner<
    Wha<
    Muff (I Use One at the time on the bass or guitar)
    Octave Multiplexer<
    Bass Balls<
    Tuner<
    Volume<
    Guitar Or Bass<

    Code:

    Is that the right order? Wath is wrong? Why i lost volume?

    Help Help…… someone know the tru out there?

    November 21, 2009 at 8:04 pm in reply to: pedal order ? #104040
    maibanez
    Member

    maybe is the pedals volume?, because I use to have more volumes when I use Muff

    November 10, 2009 at 5:58 pm in reply to: pedal order ? #103606
    maibanez
    Member

    Pedal order….

    The most of my pedals are ehx… but every time i mix a echo delay with fuzz i lost volume or phaser and fuzz or octave and fuzz… there are some they say my order is wrong, I have a USA Big muff, Russian, little big muff, bass big muff, metal muff, with the metal muff and Big muff USA and the Russian that is not the case but with the other ones I lost volume

    Amp<
    Echo#1<
    Small Clone<
    (Sometime) Tuner<
    Wha<
    Muff (I Use One at the time on the bass or guitar)
    Octave Multiplexer<
    Bass Balls<
    Tuner<
    Volume<
    Guitar Or Bass< Is that the right order? Wath is wrong? Why i lost volume?

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)