Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 10, 2009 at 1:24 am in reply to: Loop 2880 #94336
    Kefler
    Member

    Wish you the best with that dead one

    I’ve recently picked one up and during MIxdown when it says to use the fader similar to a feedback for a Delay, I dont know what that means… when the manual states to put track at 100% when recording over the mixdown track, where is 100%, is that all the way to the top of the fader or in the exact middle???

    Please help if you can, I’m trying to get a mixdown without the previous tracks comming in with too much volume

    Peace

    Kefler

    I play bass and sing in these bands:

    http://www.myspace.com/westsideallstars
    http://www.myspace.com/newprimitives
    http://www.myspace.com/javiertrejo

    March 10, 2009 at 1:14 am in reply to: Help! Clix track bleed through on 2880 #94335
    Kefler
    Member
    Quote:
    The manual actually says that “when playing back or overdubbing the clix level knob acts more like a switch for the metronome. If you have the clix level knob set to above 75% you will hear the metronome, otherwise it is silent.” (Pg. 10)

    Sounds like you don’t have a problem. Mine still remains. I’ll be trying to send it in shortly. I had a new problem that leads me to believe it might be related to power. When I tried playing with it while my PA was turned on the residual clix sound and background signal noise became incredibly loud.

    I wish an EHX rep would comment on this thread.

    Thanks for the response anyway.

    Kefler: Too true you are my man, I wish you the best with that, definately call or email ehx. I should have actually read the entire manual : my bad…

    Good luck

    Peace out

    March 8, 2009 at 8:09 pm in reply to: Rumor of a nex looper !!!!!!! #94293
    Kefler
    Member
    Quote:
    Quote:
    Really? Can they improve that much on the 2880? Well, I suppose we’ll just wait and see….

    yeah with ease. The 2880 has some real weak points to it, like all four of the loop are synched to the master loop, making it kinda pointless. A stutter function, loop multiply, etc etc etc would all be VERY welcome upgrades to it. 24 bit as well.

    Take the 2880 and add the functionality of the EDP to it with storage. I’d be all over that.

    Kefler: I’m having trouble with post mix-down additional tracking: After I’ve completed a mixdown from the first 4 tracks and I want to layer additional tracks, the previous tracks are still attatched to the individual track fader and when say punching in a vocal overdub on “track 2”, first time through pre mixdown the guitar track was also on track 2: when you try to get your track of vocals the guitar still is on that track so the volume comes up with that… Any suggestions?

    Also the unit should be able to accomodate having multiple loops stored onto a single compact flash card.

    Peace

    Kefler

    I play bass and sing in:
    http://www.myspace.com/newprimitives
    http://www.myspace.com/javiertrejo
    http://www.myspace.com/westsideallstars

    March 8, 2009 at 7:54 pm in reply to: Help! Clix track bleed through on 2880 #94292
    Kefler
    Member


    Yo Barnaby Huggins, I’ve had some weirdness from the clix track but a bit different… the click when I’m listening through headphones only is audible when turned up past 75%… I’m thinking there is a bit of a shortcoming with this clix track in general with this unit. If it continues to be and issue I’d recommend checking with the place you got it as a first resort, or secondarily check with EHX direct, they want people like us to be happy with their shit!

    post back let me know if any thing else has developed

    Peace

    Kefler

    http://www.myspace.com/newprimitives
    http://www.myspace.com/javiertrejo
    http://www.myspace.com/westsideallstars

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)