Forum Replies Created
-
AuthorPosts
-
julianModerator
if anything send it into Ronsound and have them go over it.
julianModeratorIt’s not that you need that much now. The previously mentioned things work perfectly fine for what you have.
But if you’re anything like the rest of us, in a year or two you’re going to have a crap load of pedals. That’s when you want something like it.
julianModeratorOur Band Could Be Your Life is pretty good
made me want to explore morejulianModeratorthe pp2+ is awesome, I have one, worth every penny, but the onespot is nice until you get one
julianModeratoryou can always put it in a bypass loop
julianModeratorQuote:Ok – that’s what I gathered from the manual as well. I’m not sure exactly what “auto-sweep” means. Does that scroll through the various effects? Thanks againsorry I used a poor word choice, I meant manually sweep
d’oh!
julianModeratorI don’t have a Germanium OD yet, it’s on my list.
That should be fine. The BLT could possibly not like it, but I doubt it since you’d only be running 5 pedals off of it. When you’re running 8-10 with analog and digital, then it can get a bit noisy.
julianModeratorI wouldn’t do it
julianModeratorIt heavily colors your tone when engaged. It isn’t your ears. Chorus just tends to do that.
julianModeratorThe hum debugger is more for removing 60 cycle hum from single coil guitars.
I’d recommend trying a different power supply. As far as affordable supplies go, I’d recommend the Onespot. Costs about 20 bucks and it doesn’t really have noise problems unless you use it to power analog and digital powers on the same daisy chain.
julianModeratorIf it’s before it in the chain then it shouldn’t add noise, if it’s after it, it may.
julianModeratorFrom what I understand from the manual, the expression pedal can only be used to auto-sweep the effects
julianModeratorTry contacting the amp company
The problem with FX loops is there isn’t really an industry standard and they all work a little differently. Maybe there’s something amp-side that can be done.I don’t know if using a boost in conjunction would work quite right in the loop.
Oh- if the loop is a parallel loop, perhaps the is some phase cancellation between the clean signal and the effected signal. Try using the other output on the Clone Theory and see if that has an effect.
julianModeratoryes
it will work on the 5 or 6 output when in normal 9v modejulianModeratorholy crap
that demo video was ace -
AuthorPosts
