Forum Replies Created
-
AuthorPosts
-
jsxoscMember
Hi again, just by following some advice in other threads, I repaired the SD card in a PC and now the 22500 is apparently working well -interestingly the card was not seen as fautful by the computer, but I repaired anyway and problema solved-.
Nevertheless -I forgot to mention in my previous message- the left cannel clip led keeps being always lit, like now with nothing plugged into the looper but the usb connection to the computer. I hope it has no further effect… just should not be lit.I hope this is useful for someone else, and let’s see what the left clip led does in the near future…
Cheers
jsxoscMemberHi, for what I read in this thread I think something similar happened to my unit these days.
I just discovered that if I record loops A and/or B in specifically bank 19, they are authomatically deleted when I change bank and I come back to #19.
i tried several times and this happens always, only in this bank apparently (I didn’t go through aaaalll of the other Banks…).
Is it anything that I could do? reformating the SD card -probably the only thing I can do by myself…-?Thanks
June 13, 2018 at 6:31 pm in reply to: 22500 imported rhythm loops go out of sync after a while during playback along with recorded loops A & B #123981jsxoscMemberrythm track, for sure
-I also did the other way, through LoopA, just to see if it works (it does), but I didnt check syncronicity that way with LoopB or whatsoever-
June 11, 2018 at 3:10 pm in reply to: 22500 imported rhythm loops go out of sync after a while during playback along with recorded loops A & B #123977jsxoscMemberI did, and sample rate & resolution are fine.
From the other hand, I was successfull at importing and using loops from the pack available for EHX 4500, and also from drum loops from other various web sources.
All this makes me think that perhaps the self-made loops were not 100% properly cut. The good thing is that apparently my 22500 unit is not malfunctioning.
Thank you!June 9, 2018 at 1:41 pm in reply to: 22500 imported rhythm loops go out of sync after a while during playback along with recorded loops A & B #123972jsxoscMemberI have observed exactly the same problem reported here; in fact I recently opened another thread with the same issue; I’ll check the sampling rate as you mention above. Thanks for posting your solution, I’ll see if it works for me.
Cheers!May 26, 2018 at 10:24 pm in reply to: Problems with looper 22500 after importing external Rythm tracks #123935jsxoscMemberThank you for the offer, I just did
Cheers,
OscarMay 23, 2018 at 7:19 am in reply to: Problems with looper 22500 after importing external Rythm tracks #123927jsxoscMemberThank you for your quick answer. Regarding the first point yes, I did the tempo update in the text file.
Regarding your second comment, I took my rythm patterns out of a Boss MicroBR digital recorder. I recorded there four bar samples of different on-board rythm patterns; this machine allows to precissely cut bar lenghts at specific points, so I think this should not be an issue.
However the rythm files are somewhat large -I don’t have them in front of me, but I would say a couple of MB- as compared with the few kB 22500 factory patterns. Might be the case that handling such large files causes some slow processing by the 22500 electronics, and in consequence the syncronization mismatch that I’m experiencing?
Best regards!
Oscar
jsxoscMemberHello from Spain,
I just bought a 22500 looper after so long time wishing to have a looper with sequential A & B sections, not only in parallell like my previous Boss RC30 -that I just sold-.
I already studied the online available manual before buying, so I was aware of the issue with deleting loops at the 22500.
After a few days playing with it, I can only aggree with the request to EHX to find a easier way to do this; it is even more disgusting that I was already expecting. Doesn’t look so difficult to handle for you guys at EHX!!
Cheers!
-
AuthorPosts
