Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 30, 2010 at 12:49 am in reply to: Can I use a Voodoo PP2+ to power the Holier Grail? #110560
    jamboree
    Member

    I opened up the pedal but I don’t see any cracked resistors or burned out parts. Can anyone direct me which parts are common problems with this pedal? Thanks,

    holiercircuit.jpg

    link to image:

    http://home.comcast.net/~mineral/holiercircuit.jpg

    July 28, 2010 at 9:30 pm in reply to: Can I use a Voodoo PP2+ to power the Holier Grail? #110537
    jamboree
    Member

    update: bypass signal DOES work, but when the pedal is activated there is no signal. No lights are on either.

    July 28, 2010 at 9:13 pm in reply to: Can I use a Voodoo PP2+ to power the Holier Grail? #110536
    jamboree
    Member

    Thanks for the reply, Julian.

    So I ordered a 18V DC 500ma EHX adapter off ebay and got it in the mail today. I plugged everything in…and no lights are coming on, no signal, nothing. I opened the back of the pedal and everything seems normal, but I’m horrible with diagnosing problems.

    What could I do to remedy the problem without sending it in for repair? I guess the price I paid ($20) was too good to be true :(

    July 26, 2010 at 12:03 am in reply to: Can I use a Voodoo PP2+ to power the Holier Grail? #110487
    jamboree
    Member
    Quote:
    The PP2+ is only capable of supplying 250ma on the high current outputs. You’ll have to use the original adapter or a higher current supplying power source.

    Not ripping on you or anything but really, you should be able to look up the specs of your own equipment. I found that info on Voodoo Lab’s site in less than 30 secs.

    Yeah I found the specs, but I thought it could ‘double’ the 250ma to 500ma if I used 2 outputs together. I just wanted confirmation from you guys before I shell out $20 for an adapter :(. Anyway, thanks for the quick response.

    April 14, 2009 at 7:38 am in reply to: Why is my XO Pulsar back plate glued onto the main chassis? #95623
    jamboree
    Member

    It’s never coming off.

    Oh well it still works with a 9v :rawk:

    April 13, 2009 at 9:05 pm in reply to: Why is my XO Pulsar back plate glued onto the main chassis? #95608
    jamboree
    Member
    Quote:
    Maybe your friend did it?

    I just talked to him and he said he bought it from Guitar Center, possibly a floor model.

    It makes no sense for anyone to glue it on. I could see EHX doing it for a show model, but even still that’s what the screws are there for…

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)