Gila, thanks for responding and your help!
I thought I submitted this earlier but it never went through… I am hopeful to still use CC messages to control the 1440. I know Disaster Area has a firmware release coming soon so maybe that will clean some things up.

Unlike the morningstar,the DMC will scroll through PC messages but when programming a footswitch it only sends a CC message. (*it might make sense to have 21 be a blank message so a PC code for the loop swtitch isn’t accidentally sent.)
Here are my options:
1. DEVICE # – set to “3” as is the MIDI # ON the 1440.
2. CC # – Also set to “3.”
3. MESSAGE TYPE – set to “ONE” which only sends the high value. Other options include toggle (switches between high and low values), return (sends the high value followed by the low), note (sends a midi note with the high value being the velocity).
4. LOW VALUE – currently set to “0.”
5. HIGH VALUE – I have tried “31” for RV.OC and “32” for retrigger but have gotten no response.

I will take whatever thoughts you have – it would be great to get even more out of my set-up!

I have been trying to set up my 1440 with my DMC-3XL by Disaster Area Designs. Program changes are working nicely so I can scroll through the loops. The MIDI clock also seems to be working. However, i have not figured out how to program the CC changes. I have tried adjusting the value as Gila suggested, but it doesn’t seem to respond. Any thoughts?

All in all loving the pedal even before these extra features. Thanks EHX for your great work!