Forum Replies Created
-
AuthorPosts
-
HansUrmannMember
You can find US24DC-100 or EU24DC-100 here
https://www.ebay.com/itm/183670478587HansUrmannMemberQuote:… but when testing the power supply with a voltage meter, it reads a steady 29.5v
Is this normal ?
…If you need the High-End power supply which can give you clear/stabilized 24v with/without load (your pedal) and have low ripple, you can find it here https://www.ebay.com/itm/183201899410
HansUrmannMemberMichael, Hi!
According documetation for EHX 22500 looper https://www.ehx.com/assets/instructions/22500.pdf you need adaptor for 9.6V 500mA.
You can buy standard, advanced or worldwide version of that atapter here https://www.ebay.com/itm/183146783160—
WBR, OlegApril 29, 2018 at 10:01 pm in reply to: where to purchase AC/DC 24VDC adapter (for memory man deluxe) #123852HansUrmannMemberYou can find HQ AC Adaptor US24DC-100 or EU24DC-100 here https://www.ebay.com/itm/183670478587
HansUrmannMemberQuote:Ok so I have a big muff NYC version with the 3.5 mm back for power supply, I don’t have a power supply and went to the music shop and they couldn’t help me…The valid power adaptor for you guitar effect pedal here
Power Adaptor 9V/100mA (DC Plug: jack 3.5 mono)
It have central tip “positive pole”HansUrmannMemberCould you show what is the power supply used for your pedal?
It is switching or transformer power supply?HansUrmannMemberAccording documentation for NANO LOOPER 360 the current draw is 90mA.
Your power supply PSA-240S can provide 250mA.
So, I can’t see any problems!HansUrmannMemberQuote:…if I try to use any other 24v adaptor the jack will not fit.Most of new power adaptors uses DC plug 5.5*2.1mm, but in 24v-adaptors from EHX is used DC plug 5.5*2.5mm.
My customers have no problems with that low noise power supply
Power Supply by HansUrmann (24v/100mA) -
AuthorPosts
