Hey Flick, thank you so much for the great update! The midi mapping is just amazing.
Yes, 1440 is reacting very well to MC3′ waveform generators (and you can do wonderful crazy stuff with these, as I told in the video, there I was just scratching the surface what you can possibly do)!

The Wave-generators not working was my mistake… I forgot that when you edit the MC3 by connecting it to Editor App, the generators will start work only after MC3 is disconnected from the Editor.

First experiments with EHX1440 controlled by a MorningStar MC3 were quite successful!

What I’ve successfully programmed so far:
– switch A: Reverse on/off
– switch B: on release Octave on/off, long press release sends midi CC for Overdub knob to set it full/127 or lower/88 for loop decay on/off when in Overdub.
– switch C: on release Undo/Redo, long press release Loop Erase (as 1440 will erase the loop only after having received 3 times erase PC messages in a row… why EHX? it took me a while to figure out how to make this work properly…. on MorningStar the best solution was to use the long press scroll option to send a ricochet of track erase PCs combined with a llong press to send out Stop track PC, but it’s still not working every time.)
– switch E: midi CC for Tempo knob for full (120BPM) or half speed (60BPM), a long press release sets the CC to 127 to have 1 octave higher (240BPM).
– switch F: momentary replace by sending PC for Loop Fw and CC for Overdub knob (works very well with long replaces, but short replaces are a bit tricky due to the way the 1440 works, since a fast dual press of the loop fw triggers a loop stop command)

What I still have to figure is why the midi CCs are not reacting to the MC3’s waveform generators (here the idea would be to control the Tempo knob to create wow/flutter tape style modulation effects).

so here’s my main pedalboard right now:

I just got the Ring Thing and it’s amazing!
I got also an old reissue Deluxe Memory Man and a Small Stone, but I’m using them elsewhere.