Forum Replies Created

Viewing 15 posts - 91 through 105 (of 248 total)
  • Author
    Posts
  • in reply to: The V256 Vocoder rocks! #112793

    im jealous. i want a v256 bad!

    well i have asked some questions on temperature affecting pedals and it seems to not affect it at all. i had my bmptw (big muff pi with tone wicker) in a cold room for quite a while (all winter) and put it on the heater when i began to play. while unplugging, the pedal was really warm and that made me wonder if it was bad so i asked and people said no.

    you can have your pedal upside-down, flat, lying vertical or any direction. ehx makes their pedals extremely stable inside and i dont think you would really have to worry about it anyway with others.

    another name for a pedal is a “stompbox” and pedals can take some hits. if you have to turn something on with your foot, you generally dont have to worry about it getting hurt. you can keep your v256 in its box or just leave it laying around.

    as you could have guessed before, i dont have a vocoder so i dont know if the wiring set up would work. you can set it up and see if it works though?

    it looks like your pedal will be safe although just to not have too much to worry about, i wouldnt leave it in the basement where it could freeze

    in reply to: Need new “Fine” toggle switch for 16 Second Delay #112783

    futurlec carries slide pots at really cheap prices. find out what the value is on the broken one then look for it.

    in reply to: the edge settings. #112777

    if he used 2 memory boys in a row, use the bill ruperts ehx tone tips #1 to dual loop a stereo memeory man. im guessing you wont be able to do that cause you just have a memory boy

    in reply to: Electronic Metronome #112775

    thats a cool idea!

    in reply to: Nano Double Muff is here! #112753
    Quote:
    Quote:
    Quote:
    Damn… so busy with the site that I missed this :(

    Shame on you! 😆

    :wave:

    Yes, I know…

    Maybe next time someone can send me a notification? :p

    uh. . .discofreq, i dont think they will be reissuing the nano double muff any time soon. . .or at all.

    just kidding

    in reply to: i need help on building a pedal #112740

    so would this work?
    buffers.jpg

    in reply to: i need help on building a pedal #112739

    sweet. thanks

    in reply to: i need help on building a pedal #112733

    thats ok. i bought a really good book and its been helpin me out alot

    in reply to: i need help on building a pedal #112729

    oh and julian, you too, i had a question

    in reply to: i need help on building a pedal #112728

    hey mel, i was wondering what it was that you were saying about the buffers and stuff. you never got back to me on that. i ordered a ton of parts last night and my dad said he would get me a bread board or 2 from his work and get em to be by friday next week

    in reply to: Effectology Challenge #112681

    i wonder how well the octave up on a bass micro synth is? oh and are the micro synths monophonic? im thinkin they are cause its analog right?

    in reply to: i need help on building a pedal #112619
    Quote:
    At the very least, you’d want 100kA volume fader after every effect followed by a 4k7 mixing resistor.

    ya i planned on using that idea. whats the a in 100kA? also whats this 4.7k mixing resistor?

    in reply to: i need help on building a pedal #112613

    i aint got no parts to work with so i thought i might figure it out 1st, make sure it works and then buy all the parts

    in reply to: i need help on building a pedal #112606

    monopedalidea2.png

    so i printed it off and showed it to my dad and he said it wouldnt work. “all the outputs would be tryin to fight eachother” now i kinda understand if thats true but is this where the buffer idea comes in mel?

    in reply to: i need help on building a pedal #112592

    can you link me a buffer. also what kind of problems are there?

Viewing 15 posts - 91 through 105 (of 248 total)