Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 5, 2016 at 10:47 pm in reply to: Freeze mod #121260
    Fairbanks
    Member

    You could make one yourself if you have two short mono cables and a soldering iron. That way you won’t have to wait.

    February 5, 2016 at 7:00 pm in reply to: Freeze mod #121257
    Fairbanks
    Member

    It should be a single mono to two mono SPLITTER cable – no stereo plug since neither the Freeze nor LS2 can use a stereo plug.

    Hope that works for you.

    March 10, 2011 at 10:39 pm in reply to: Freeze mod #114616
    Fairbanks
    Member

    http://axiomdrift.com/freezeloop.htm

    Here is a guy adding an effects loop to the Freeze pedal. Exactly what I was looking for.
    I’ll post again when the modded pedal arrives.

    August 5, 2010 at 11:34 pm in reply to: Freeze mod #110735
    Fairbanks
    Member

    Thanks for the suggestion Cryabetes. That is exactly one of the things I tried – I use the LS2 on everything!
    But I do lots of short sustains and not many drones, so there is no time for more button presses.

    Mostly I’m trying to minimize the amount of pedals, but for now I’ll just use an aux send from a small mixer.

    August 5, 2010 at 11:03 pm in reply to: Freeze mod #110732
    Fairbanks
    Member

    Thanks for the probe info Julian.

    Yes, the components are tight in this pedal, but it’s worth a poke I think.

    I’d also like to replace the footswitch with something more silent.
    Hopefully there will be a “Deluxe” version of the Freeze with filter and Sustain/Decay/Release envelope settings.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)