Forum Replies Created
-
AuthorPosts
-
EHX STAFFKeymaster
Sorry!
please contact service at:
info@ehx.com
they can help you out.EHX STAFFKeymasterExchange for a good one please
EHX STAFFKeymasterIt ships with a battery so it will work right out of the box.
It uses the standard a standard batter wall supply. You can use the EHX supply or others like Boss as long as the voltage and connector is correct.EHX STAFFKeymasterWell make sure the adapter is good first.
If so please contact the service guys as the jack might be bad.
info@ehx.comEHX STAFFKeymasterChris this sounds like it must be a ground loop issue. If the amp has a ground lift option that could solve it. or try to see if having the amp and super switcher being powered from the same outlet might help.
EHX STAFFKeymasterThanks Dennis
Well that puts the blame on the pedal..
Sorry. please write the techs at info@ehx.comYou said you had a problem getting through,so I will tell them to keep an eye out for your message. Sometimes things go into their spam folder.
PS I LOVE your amp.
EHX STAFFKeymasterThe EHX repair shop can help you out fast and cheap!
info@ehx.comEHX STAFFKeymasterGreat I heard it!
I have not heard that noise before.
Please do me a favor… go guitar into the Lester and Lester into the amp bypassing the other pedals.
This is just to see if the noise is internal to the Lester or sneaking in via a loop from the other pedals.EHX STAFFKeymasterYes but all that is there is one jpeg picture
EHX STAFFKeymasterIf it has a line out you are fine.
Just dont put a straight speaker out to the input of the 44.EHX STAFFKeymasterCan you put it on youtube?
EHX STAFFKeymasterNo schematics sorry.
For service please contact:
info@ehx.comJune 4, 2019 at 3:35 pm in reply to: Ocean’s 11 no infinite reverb & mode button not functioning #125280EHX STAFFKeymasterAlso a few modes do not have in INV function ,like spring and auto inf and a few Dyn modes.
June 4, 2019 at 3:31 pm in reply to: Ocean’s 11 no infinite reverb & mode button not functioning #125279EHX STAFFKeymasterTry this please
USING INFINITE REVERB
1. Decide which footswitch to use for controlling this feature. You can use either the internal footswitch or an external footswitch connected to the INFINITE jack. Plugging in an external footswitch, however, always disables the internal footswitch’s infinite reverb functionality.
2. If using the internal footswitch, ensure that the internal “TAILS” switch is ON; infinite reverb is inaccessible when this switch is OFF. If using the external footswitch, however, infinite reverb can be engaged regardless of whether TAILS is on or off.
3. Press and hold down the footswitch for more than 350 milliseconds. The LED will quickly cycle green, red, then orange to indicate that infinite reverb is engaged.
4. To exit infinite reverb, release the footswitch. The pedal will return to the state it was in before engaging infinite reverb.Manual here
https://www.ehx.com/assets/instructions/oceans-11.pdfIf your still having the issue please contact the service techs at:
info@ehx.comEHX STAFFKeymasterDONT DO IT!
You need a direct box to take your amps output and convert it to a line level signal.
Then you feed that to the Mag amp. -
AuthorPosts
