Forum Replies Created
-
AuthorPosts
-
August 3, 2021 at 2:35 pm in reply to: EHX Voice Box, Unwanted break-up and distortion while using the Vocoder patch #184530EHX STAFFKeymaster
Efarns Please write the techs at:
info@ehx.com
They can help you out!August 1, 2021 at 9:24 am in reply to: The What Is The Current Draw For That EHX Pedal Thread #184474EHX STAFFKeymasterRusty please write the techs on Monday at info@ehx.com
EHX STAFFKeymasterTmac Yes the new firmware is great! Download it here:
https://www.ehx.com/products/22500/Its right under the specs section.
Any trouble please write the techs at info@ehx.comHave fun!
- This reply was modified 3 years, 3 months ago by EHX STAFF.
EHX STAFFKeymasterWell if your using a amp simulator put the looper after it and you will be fine.
In other words anything that distorts put before the looper so the looper has a clean path out.EHX STAFFKeymasterTMac Does your amp have an effects loop?
Or are you cracking the amp for power amp distortion?EHX STAFFKeymasterKim the POG2 doesn’t have a factory reset.
July 25, 2021 at 5:29 pm in reply to: Tri Parralell Mixer – keeps clicking and lights flickering #183387EHX STAFFKeymasterSorry!
Looks like it needs to be serviced.
Please write the service tech on Monday at:
info@ehx.comAgain sorry for this trouble.
EHX STAFFKeymasterNo you would need a device that sends CV. The MC3 has only midi out as far as I know.
Drop Morningstar a note and ask them.EHX STAFFKeymasterMM please write the techs at info@ehx.com
July 13, 2021 at 11:01 am in reply to: Dirt pedals OK to run at 18V? Or not worth it? Results? #131921EHX STAFFKeymasterNo please run at the 9 volts it was designed for.
Hitting it with 18 volts can pop a protection diode making the pedal dead in the water.EHX STAFFKeymasterYes 9 or 9.6 is fine.
A fresh 9 volt battery puts out 9.6 volts.
Daisy chaining can sometimes causes noise in digital pedals.
Its a thing you have to try with the pedals you have. If noise is present from the outputs not being isolated you will have to use the EHX supply.
Also some supplies ramp up their voltages slowly which can stall out some of our digital pedals causing you to re-plug them in.EHX STAFFKeymasterPlease write the techs at info@ehx.com
EHX STAFFKeymasterMy guess is its the power supply.
Does it work in the chain using the ehx supply and not daisy chaining the power?EHX STAFFKeymasterPlease write the techs on Tuesday.
info@ehx.comEHX STAFFKeymasterDoes it work with the EHX supply?
-
AuthorPosts
