Forum Replies Created
-
AuthorPosts
-
EHX STAFFKeymaster
Sorry
its sounds like a classic ground loop from a daisy chain power source that has non isolated outputs.
Does the pedal hum when its powered by the EHX supply?
If so please write the techs at info@ehx.com.EHX STAFFKeymasterSorry
It is a distortion pedal and will make some noise as they all do, but this sounds like something is way wrong.
please write the techs at info@ehx.comEHX STAFFKeymasterYou are best to write the techs to see if that is an alignment problem.
Please write:
info@ehx.comThey are there Mon thru Friday 9am-5pm Nyc time
EHX STAFFKeymasterNo that should not change day to day.
is it a newer pedal or a vintage unit?EHX STAFFKeymasterIt is an analog delay based pedal and can cause some noise..
But please write the techs and see if they have a fix.
Write on Monday at info@ehx.comEHX STAFFKeymasterPlease write the techs on Monday. info@ehx.com
The designer of the pedal John, is on vacation this week.
When he is back he can really help you out on this issue.August 8, 2021 at 8:51 am in reply to: once plugged in, the V256 Vocoder turns off after about 6 seconds #184552EHX STAFFKeymasterSorry!
First make sure you are using the correct EHX power supply!If yes please write the techs on Monday at info@ehx.com
They can help you outAugust 3, 2021 at 2:36 pm in reply to: Any chance of a reissue of the green label Electric mistress v2? #184531EHX STAFFKeymasterthanks I will forward this to the guys upstairs!
August 3, 2021 at 2:35 pm in reply to: EHX Voice Box, Unwanted break-up and distortion while using the Vocoder patch #184530EHX STAFFKeymasterEfarns Please write the techs at:
info@ehx.com
They can help you out!August 1, 2021 at 9:24 am in reply to: The What Is The Current Draw For That EHX Pedal Thread #184474EHX STAFFKeymasterRusty please write the techs on Monday at info@ehx.com
EHX STAFFKeymasterTmac Yes the new firmware is great! Download it here:
https://www.ehx.com/products/22500/Its right under the specs section.
Any trouble please write the techs at info@ehx.comHave fun!
- This reply was modified 2 years, 12 months ago by EHX STAFF.
EHX STAFFKeymasterWell if your using a amp simulator put the looper after it and you will be fine.
In other words anything that distorts put before the looper so the looper has a clean path out.EHX STAFFKeymasterTMac Does your amp have an effects loop?
Or are you cracking the amp for power amp distortion?EHX STAFFKeymasterKim the POG2 doesn’t have a factory reset.
July 25, 2021 at 5:29 pm in reply to: Tri Parralell Mixer – keeps clicking and lights flickering #183387EHX STAFFKeymasterSorry!
Looks like it needs to be serviced.
Please write the service tech on Monday at:
info@ehx.comAgain sorry for this trouble.
-
AuthorPosts
