Forum Replies Created
-
AuthorPosts
-
EHX STAFFKeymaster
Make sure the phantom power switch on the side is turned off.
It could also be a ground loop,make sure everything is plugged in to the same AC wall socket.
If it persists contact info@ehx.comEHX STAFFKeymasterThe Analogizer is pure analog.
It will take any digital effect and transform its sound into that creamy dream like analog sound you here in a pedal like the original Memory Man.
It will also overdrive producing a wonderful warm OD effect.
It is great on bass as well!A video demo will be available very soon!
Quote:Wait, so the analogizer is digital? A digital solution to digital problems?Nevertheless, still interested.
EHX STAFFKeymasterHere is the EHX video:
EHX STAFFKeymasterPlease write:
info@ehx.com
Tell them what your problem is.
They will advise you how to get that HOG back up to 100%!EHX STAFFKeymasterWrite info@ehx.com.
They should be able to help.
(The EHX factory is in the process of moving to a new location so Email may be down temporarily)July 22, 2011 at 3:54 pm in reply to: POG2: Exactly what is the “Q” and also anyone know of a recall sheet? #106029EHX STAFFKeymasterGet the most out of your POG2 Polyphonic Octave Generator with these suggested settings!
Click on the links below to see the different settings:POG2 Settings 1
https://www.ehx.com/assets/blog/tone-tips6-pog2-set1.jpgPOG2 Settings 2
https://www.ehx.com/assets/blog/tone-tips6-pog2-set2.jpgPOG2 Settings 3
https://www.ehx.com/assets/blog/tone-tips6-pog2-set3.jpgPOG2 blank template for your own settings
https://www.ehx.com/assets/blog/tone-tips6-pog2-set4.jpgEHX STAFFKeymasterYou do not want a discrete right and left with reverb.
The outputs are placed in a spread that is panoramic.
Just as you hear things in a big room in real life.EHX STAFFKeymasterPlease write or call Chip and tell him your problem:
info@ehx.com
or call at:
(718) 937-8300Quote:I just got this HumDebugger from Musicians Friend, and I absolutely love it. Problem is, sometimes when I turn on my pedal board from the Furman power conditioner, the HumDebugger shows a green light, but it mutes the signal through it. I can usually turn off and on again to get it working. Just wondering if this is normal or did I get a defective unit?I should also add, I’m using the supplied power transformer that was in the box. Seems some people have had issues there.
April 25, 2011 at 2:25 am in reply to: Please Help! My EHX Tube EQ isnt working! Volume starts to die. #115085EHX STAFFKeymasterVery good chance its NOT the tubes.
It needs to be serviced and that pedal its not user serviceable at all!
DO NOT open it up as its a high voltage circuit.
If you short out the board with the case you will kill the pedal.
Return the unit if it is new or send it in for repair.EHX STAFFKeymasterCheck it out.
EHX STAFFKeymasterJohhny where are you located?
Quote:Quote:Your best bet now is to write Chip Scooter at:
info@ehx.com
or give him a call at:
(718) 937-8300
He will advise you how to get your Hoax back up and running.Quote:ok, so messed with the trim pots and am now the owner of a useless FH.do not try to mess with the trim pots inside. learn from my mistake.
i did sir, but to no avail.
there are no repair centers in my country. oh well, i guess i’ll just figit with the six knobs until i get a good result.
so depressing…
EHX STAFFKeymasterYour best bet now is to write Chip Scooter at:
info@ehx.com
or give him a call at:
(718) 937-8300
He will advise you how to get your Hoax back up and running.Quote:ok, so messed with the trim pots and am now the owner of a useless FH.do not try to mess with the trim pots inside. learn from my mistake.
-
AuthorPosts