Forum Replies Created
-
AuthorPosts
-
EHX STAFFKeymaster
NO!
WD40 will kill the pedal. That is oil. Deoxit is a special contact cleaner for switches. Use nothing else pleaseAugust 25, 2022 at 5:02 pm in reply to: TRI PARALLEL MIXER Problem “metallic sound like a flanger” #192609EHX STAFFKeymasterPlease write the techs at info@ehx.com
EHX STAFFKeymasterPlease write the techs at info@ehx.com
EHX STAFFKeymasterNo You did not blow it up that way.
Is the battery good?
Are you using a power supply?
The switch may be dirty. A dirty switch will do what you are hearing. I clean mine with Deoxit contact cleaner.
You can write the techs for help at info@ehx.comIf it is brand new please exchange it.
SorryAugust 22, 2022 at 9:24 am in reply to: Guitar Synth sound settings in the Attack Decay demo by Bill Ruppert #192391EHX STAFFKeymasterYour signal is to week or low, so turn up the sensitivity control to make it trigger easier. Also use your bridge pickup.
EHX STAFFKeymasterIf the unit is vintage, post in the vintage section, as someone there can help you.
If it is a newer unit, the techs can fix it at info@ehx.comEHX STAFFKeymasterHere is the link on the wayback machine
https://web.archive.org/web/20170714110424/https://www.ehx.com/forums/viewthread/8078/
On the newer units, there is an internal switch to send outs differently. You unit if newer may have this.
Please write the techs at info@ehx.comEHX STAFFKeymasterSorry no idea what product you are talking about.
Please write the techs at:
info@ehx.comAugust 17, 2022 at 2:45 pm in reply to: Guitar Synth sound settings in the Attack Decay demo by Bill Ruppert #192365EHX STAFFKeymasterThanks Ohm
I had a listen.
First That sound I did is for solo sounds only. it will not work for chords.
Second, something is wrong as it sounds like you’re not driving the pedal hard enough.
I can’t even hear the effect, it’s just dark.
Turn up the sensitivity knob and make sure the poly light is on.
Your going to have to adjust things to work as it’s not being driven hard to open the envelope..August 15, 2022 at 12:48 pm in reply to: Guitar Synth sound settings in the Attack Decay demo by Bill Ruppert #192340EHX STAFFKeymasterOhm
I am sorry they told me your mail did not go through. Please try again and put For Bill Ruppert in the header.
You could also throw it up on youtube as well and post the link here.EHX STAFFKeymasterTo control peak’s place the compression after the Mel9.
Set it clean and use only enough to remove the loud spikes.
The pic at the top of the page shows a setting that should work:Another trick is to simply lower the volume on the mel9, so you have to dig in a little to get max volume.
August 8, 2022 at 6:12 pm in reply to: Super Switcher volume loss intermittent but unacceptable also unit freezes up! #192099EHX STAFFKeymasterPlease write the techs at info@ehx.com
Check your spam folder if you do not hear backEHX STAFFKeymasterPaul Please write the techs at info@ehx.com
EHX STAFFKeymasterCould be a dirty switch. Please write the techs at info@ehx.com
July 31, 2022 at 3:36 pm in reply to: Guitar Synth sound settings in the Attack Decay demo by Bill Ruppert #192031EHX STAFFKeymasterYes that looks right.
blend is at max.
Make sure the amp is set very clean.
Use the neck pickup
Make sure you are not overdriving the amp into distortion. -
AuthorPosts
