Forum Replies Created
-
AuthorPosts
-
June 13, 2016 at 3:00 pm in reply to: Just bought a 22500 loop pedal and having some trouble #121616EHX STAFFKeymaster
Have you updated the firmware.
Its on the 22500 product page on this site.I that still does not work please try another SD memory card.
Or please write the service guys at info@ehx.comJune 7, 2016 at 6:51 pm in reply to: Will Leslie G sound great when used DIRECT to Marshall 1987x #121603EHX STAFFKeymasterWould you put a reverb in front a cranked dirty amp??? NO
Same thing with this.
If your amp is cranked to total distortion that will change and blur the effect.
The lester has its own distortion so when it is plugged into your Marshall turn the amps gain down and you will be fine.If you want to run your preamp on 10 than forget it or use it in the effects loop.
That is why there is an effects loop.June 7, 2016 at 4:30 pm in reply to: Will Leslie G sound great when used DIRECT to Marshall 1987x #121601EHX STAFFKeymasterIf the other mod pedal you had sounded bad because of amp distortion…well that is the way it is.
No way around it.June 7, 2016 at 4:28 pm in reply to: Will Leslie G sound great when used DIRECT to Marshall 1987x #121600EHX STAFFKeymasterIt should sound cool!
if you crank the amp way up the effect will be distorted but that may sound very cool….EHX STAFFKeymasterSure! just watch the levels. If it distorts tun it down.
EHX STAFFKeymasterVery cool! Thanks it sounds great!
EHX STAFFKeymasterUncle E to use both outs you need something in both inputs.
May 27, 2016 at 3:04 pm in reply to: Memory boy connected trough AUX send/receive of mixing desk #121571EHX STAFFKeymasterYou should be fine just watch levels. Start LOW.
EHX STAFFKeymasterALSO make sure you have LOOP-LOCK SEQUENTIAL—
QUANTIZE ONEHX STAFFKeymasterCheck the manual out on page 26 and 27.
It tells you how to do it.EHX STAFFKeymasterIt may??????? be an issue that the third party power supply is slowly ramping up the voltage as its turned on.
That may stall the pedal at start up. The EHX supply is very fast on startup.
Let me know if our supply works or not. I have copied this to the head engineer at EHX.
its hard because its not our supply causing the problems most of the time.let me know when you try our supply.
EHX STAFFKeymasterProjuice Did you say you tried different C9 and B9 pedals and the problem was not there?
And did you try the other B9 and C9s in your system with your multi supply?
Do you have the problem using our supply?EHX STAFFKeymasterThese are two pedals the JHS and EHX sound VERY VERY different.
They have NOTHING to do with each other in any way!EHX STAFFKeymasterDoes it work with the supply we shipped with the unit???
If so its your power supply.
If you want to use that supply you will need a isolator like the Diago Isolator or get a real isolated supply.Do a search for Diago Isolator with EHX Pitch Fork – Guitar Effects Pedal Power Supply Noise Eliminator on youtube.
EHX STAFFKeymasterDoes the Q-tron work now??
-
AuthorPosts