What your hearing in the ravish picking up the 5th overtone from your guitar string. If you pinch pick a distorted guitar to hear the harmonics (ZZ top)the 5th is strong within the fundamental note.
Lower strings produce this stronger.
The harder you pick the lower string the more you will hear the 5th.
Try the neck pickup or pick a little softer as that will reduce it some or adjust the Sympathetic knob on the right.
Its with in your natural string harmonics and will be there to some degree.
That said its a 5th and it works for drones…the root is still there.
Hope that helps a little.

They are very different designs and software.
You can not dial the Hog to sound like the others. You can get some great organ sounds with the HOG but its very different than the B9 and C9. The Mel9 is in a world of its own.

Sorry no it can not do that.

OH NO!
That does not sound good.
if you are using the ac adapter that came with the pedal please check cables.
If still no sound it must be fixed.
PLEASE contact service on Tuesday as its a holiday here in the US.
Again I am so sorry for your trouble.
It WILL be fixed.

info@ehx.com

Nobody can tell you what you like. experiment.

Yes try the settings sheet. Other wise there is no way to load the originals back.

The settings sheets above were done by Bill Ruppert of Effectology.

Sorry Doc for the no email. It may have gone into spam??? I will check.
Today is Saturday and the factory is closed for the weekend.

1. There is no read out to show what version firmware you have.
This new firmware was to fix some bugs in older units.
If your 4500 had the drum loops is almost certain you have the new firmware.
They were done at the same time
BUT…if in your in question load the new firmware. It can not hurt.

2. The drum loops are stored om the mix down track of the 45000.
If you record and erase tracks 1-4 the drums will stay untouched. If you create a NEW LOOP using the red button on your left, you will erase the drums stored on the mix channel.
To restore a drum loop, load the loops from the web page and reinstall what you want on the SD card.
There is no way to move loops around with in the 45000.
You can move what ever you want when the SD card is in the computer.

45000 SOFTWARE UPGRADE INSTRUCTIONS
REQUIRED ITEMS:
? 45000
? SD Card
? 45000 Power Supply
? USB Cable or SD Card Reader
PROCEDURE:
1. Download the data file called 5LNYxx.bin to your hard drive. This file is included in the zip file that you downloaded or were emailed. The xx number is a number greater than 16.
2. Copy the 5LNYxx.bin file to the 45000’s SD card. Do this by either connecting your 45000 directly to your computer via a USB cable or by ejecting the SD Card from the 45000 and inserting it into a USB Card reader/writer drive and then connect that to your computer.
3. Once the SD Card appears on your computer, copy the 5LNYxx.bin file to the root directory of your SD Card. Do not place the .bin file in any folders on the SD Card.
4. After the file has been copied to the SD Card, eject or stop the card on your computer. If you were using the 45000 disconnect it from the computer. If you were using an external drive, move the SD Card from the USB drive to the 45000.
5. For the next few steps we recommend disconnecting the 45000’s audio outputs since a loud pop can occur after the update runs. Please do not remove power at any point during the next few steps.
6. While the 45000 is powered up and running, press and hold down the OCTAVE button. After holding OCTAVE for approximately 3 seconds, the 4 track LEDs on the 45000 will blink rapidly a few times.
7. Once the LEDs begin blinking you can release the OCTAVE button.
8. After the LEDs finish blinking the 45000 will automatically restart and load the new software. During the restart, all the LEDs will blink once.
9. Your 45000 is now upgraded. If you like, you can connect the 45000 to your computer again and delete the .bin file from the CF Card otherwise it will remain on the card which is also fine.
Upgrading your 45000 software will not erase any loops that are on your SD Card.