Electro-Harmonix

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
July 20, 2011 at 2:09 am in reply to: Echoflanger power switch #111575

curtc1
Participant

Can I remove the transformer and change it for a power supplier with a DC adapter?

June 9, 2011 at 1:16 am in reply to: Echoflanger pop’noise. #115514

curtc1
Participant

Ok.

This is the switch: http://www.hotroxuk.com/images/amp_parts/3PDT_true_by_pass_switch.JPG

And this is what I need to know if I can do the same:

June 8, 2011 at 11:48 am in reply to: Echoflanger pop’noise. #115480

curtc1
Participant

Is there a schematic I can use to turn it into a true-bypass?

June 8, 2011 at 2:36 am in reply to: Echoflanger pop’noise. #115472

curtc1
Participant

The solder joints looks fine.

Can I replace the SPST switch for a 3PDT? I can do it myself but I need to know wich conectors I need to use on the new switch. I can’t find a useful wiring diagram.

June 8, 2011 at 12:44 am in reply to: Echoflanger pop’noise. #115469

curtc1
Participant

Yeah, It’s an SPST.

It looks like this one: http://www.smallbearelec.com/catalog/MomSoftTouch.JPG
But it have two connections on both sides.

There’s only one side of the switch wired.

What about the effect on/off problem? It only turn on the effect when I change the mode knob and then turn it on/off/on. It’s weird because the rate and feedback still works, but to activate the “effect” I need to do this.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)