Forum Replies Created
-
AuthorPosts
-
CryabetesParticipant
which are you looking to date? probably is going to be different depending on which model.
CryabetesParticipantwell… you could always do a Yuri Landman and change around the pickups like so: http://www.hypercustom.com/twister.html
CryabetesParticipantI think ehx should make more envelope driven effects; consider an envelope driven pitch shifter- you play a note, and it detunes in time with the volume to the desired range.
CryabetesParticipantGo slow. dinner and a movie an all that. Don’t expect to spend the night right away.
CryabetesParticipantyou could put it in a bypass loop [Boss LS-2/EHX Killswitch/DOD FX30B/etc] and that would fix it. otherwise, there’s not a ton you could do with the smd type stuff that is the Neo Clone.
although
persons more pedal-knowledgable than myself
that 1M resistor people recommend attaching from output to ground
could you make that outboard? like on something that’d just plug into the output jack of the pedal?May 9, 2011 at 6:59 pm in reply to: Footswitch knocked loose on Big Muff Pi With Tone Wicker #115170CryabetesParticipantQuote:I would just play it safe and replace it.this. a fix of a busted mechanical part will probably only be temporary until it breaks again.
CryabetesParticipantpretty sure you can. I know the older models didn’t like to be daisy chained, but I think the nanos are fine with it.
CryabetesParticipanti think, when using the 2880 with an external midi clock, you have to stop it from the master clock. Turning it off + back on with the master clock stopped should do it.
CryabetesParticipantAlso, we’re not EHX technicians, just enthusiasts who occasionally dabble in repair/mods. EHX technicians can be contacted at http://newsensor.com/CutomerServices.aspx
CryabetesParticipantI laughed.
CryabetesParticipant
so good. as far as I’m concerned, this is the pinnacle of music created ever.
CryabetesParticipanti think feedbacks go further when you do that. also there might be some crosstalk, but otherwise you’re effectively doubling the delay time.
I know with a lot of stereo chorus pedals, you can loop one output back into the input and use the rate and feedback knobs as a monophonic oscillator. sounds like something you might be into.
CryabetesParticipantdang, guess you just have to buy two, huh?
April 17, 2011 at 8:16 pm in reply to: Problem with midi clock sync between Logic Pro 8 and 2880 Super Looper #115035CryabetesParticipantis it at all possible that your computer is the problem? I mean, there is variance in midi time code [more data chokes the baud rate]. an overtaxed cpu acting as the master clock could exacerbate those variances.
CryabetesParticipantshould work. just make sure using the headphone out isn’t going to cut your output signal off.
-
AuthorPosts
