Forum Replies Created
-
AuthorPosts
-
November 25, 2011 at 6:02 pm in reply to: New Pedal info leaked: Superego, Tone Tattoo, Crying Tone, Volume, Talking, Expression, & Pan, #116416CryabetesParticipant
yeah he said nothing like it out right now right? I mean the Instant LoFi junky is out and that’s a similar concept…
CryabetesParticipantyou can’t access that through the function menu? I’ve got a DGX200 and i’m fairly certain I can change the midi channel on mine. You can snag the manual for the DGX300 here: http://usa.yamaha.com/products/musical-instruments/keyboards/digitalkeyboards/dgx_series/dgx-300/?mode=model
November 14, 2011 at 1:20 pm in reply to: A problem with the preset led of my Stereo Memory Man w/Hazarai. #116332CryabetesParticipantsame daisy chain cable each time?
November 11, 2011 at 1:45 pm in reply to: What are the exact specifications for a MEMORY TOY power supply #116320CryabetesParticipantthink it’s a certain factory again, like that POG2 fiasco last year?
November 10, 2011 at 1:45 pm in reply to: Memory Toy works with 7,5V 300mA but dosen`t with 9V #116307CryabetesParticipantbeing under the voltage is likely not going to hurt anything. you may notice less headroom, but that’s about it.
November 10, 2011 at 1:43 pm in reply to: Stereo Memory Man w/ Hazarai STEREO MODE HELP NEEDED #116306CryabetesParticipantstereo output chorus pedal -> L & R inputs of the SMMwH.
really can be any stereo output pedal.
CryabetesParticipantthere’s an html version over at looper’s delight.
http://www.loopers-delight.com/tools/eh16II/eh16-manual.html
cheers.
CryabetesParticipantthe HOG and 2880 footswitches both work for the reissue 16sDelay. Not sure about with the original. May need to bust out the labelmaker though to rename the footswitches.
CryabetesParticipanthave an email address I can shoot a diagram to? i’m at work and can’t upload stuff.
CryabetesParticipantthe true bypass. You could use an A-B switch to control whether signal gets sent to the SMMwH and then recombine the output of the SMMwH with the bypassed signal with a Y cable.
CryabetesParticipantare you using it in one of the high amperage outputs? that’d be the one labeled L6. Make sure that’s set to put out 9vDC though.
November 1, 2011 at 6:27 pm in reply to: Noise from Footswitch for 2880 making its way into my loops #116255CryabetesParticipantdon’t use an omnidirectional microphone?
CryabetesParticipantotherwise you could use the DD-20 in the effects loop of the DMB. turn down the feedbacks on the DMB so it is pretty much just all tail.
CryabetesParticipantand Analog or Tape mode isn’t giving you the sound you want?
CryabetesParticipantI know it’s one of the flavors of distortion Mogwai use on ‘the Precipice’
-
AuthorPosts
