Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • in reply to: Small Clone/Big Muff problems #101992
    CaptainHook
    Participant

    Well, the power adapter worked, and all is well at least – sorry to have jumped the gun on the quality control issue.

    EXH are back in my good graces as I’m very happy with the Small Clone (sooo much better than the Boss Super Chorus) and Holy Stain. Now just need to save up for a Pog.

    in reply to: Holy Stain!!! #101961
    CaptainHook
    Participant

    One thing I didn’t mention is that the tone I get by combining either clean reverbs on the Stain (preferably Room), with both knobs at 2 o’clock, and my Boss DD-6 Delay, at 300ms, feedback at 1 o’clock, delay knob at noon, sounds incredible.

    in reply to: Holy Stain!!! #101942
    CaptainHook
    Participant
    Quote:
    That its pretty cool!

    Eh, he’s probably better than me already any ways. :)

    in reply to: Holy Stain!!! #101938
    CaptainHook
    Participant
    Quote:
    My 10 year old nephew is learning guitar. I bought him the holy stain for his birthday. He loves it! hes been able to come up with tons of cool sounds. its the only pedal he has and it never ceases to amaze how many cool tones hes come up with.

    So what’re you trying to say here? :)

    in reply to: Holy Stain!!! #101913
    CaptainHook
    Participant

    For now it’s earned it’s perm place on my board, great mix of top notch, lush reverb and fuzz dirt.

    I don’t have much of a problem with the clean reverb on this, as long as it’s connected to my amp in the chain. My Jazzmaster and Tele play clean reverb on this quite nicely. And the reissue vintage pup’s on my guitars may help the fuzz, as I don’t know what some people are complaining about there in various reviews. Of course it doesn’t have options of a dedicated fuzz, but the tones it does produce are very useable and nice. I play a wide mix of styles and songs, so it suits me well I suppose.

    Very happy with it for the price.

    Sorry for the thread necromancy here.

    in reply to: Small Clone/Big Muff problems #101908
    CaptainHook
    Participant

    Checked inside the pedal and didn’t see any wires not connected, loose etc.., looks fine. So, I’m clueless, will see if the power adapter helps. Only have 7 days to return on Ebay, so, am not sure what to do yet. Love the tone of this pedal and am reluctant to give it up.

    Thanks again for the replies.

    in reply to: Small Clone/Big Muff problems #101892
    CaptainHook
    Participant
    Quote:
    I wouldnt judge EHX to harshly. I’ve actually had the same problem with some of the MXR effects I used to have. Pretty much every one in the industry thats makes true bypass effects uses that same switch. I switched to EHX because that had the tone I wanted. But they have a kinda old school mad scientist way of doing things. So I accecpted that when I came on board. But out of probably twenty pedals I own of theres that use that same switch only two have had this issue. There all a hundred times better then the Line6 crap I used to have. every time I would open the road case that my podXT pro was in I would find some buttons and knobs from the front of it at the bottom of the case that had fallen off. And its not like I was throwing it around or anything. My band went through three pod XT pros in about a year and a half. and at $600 a pop it wasnt worth it.

    Thanks. Trying not to – but I hardly feel good about a new $85 pedal that is a lemon, and am not sure I feel much better about “3 out of every 20” being a bad pedal! (vintage style or not)

    I think we should be demanding a bit higher quality control standards eh?

    in reply to: Small Clone/Big Muff problems #101885
    CaptainHook
    Participant
    Quote:
    I had the same kind of issues with my Small Clone. basically I had to resolder one of the wires on the back of the switch. It had either come out because of bad original soldering or it had come loose. Sense most of the EHX true bypass classic style use the same switch it could happen to any of them. same thing happened on my holy grail too. loose switch wires.

    Well that’s not good to hear. I have no way of soldering anything at home – and am foreign to it.

    Probaby something I should learn to do though…*Sigh*

    Not a god first time experience with EHX – maybe they should look into fixing this issue.

    I wonder if they’ll repair mine if i do the $12 thing without a warranty card or receipt though…

    in reply to: Small Clone/Big Muff problems #101874
    CaptainHook
    Participant
    Quote:
    Quote:
    So would the patch cables also drain from it’s power even when everything is turned off? I am using the default battery that came with it – guess i’ll try a new battery first, which I haven’t done.

    If you have the cables hooked into the input and output it will drain the battery regardless of whether you actually have the pedal on or not. You have to disconnect the input one (I think) just to make sure. Also have you switched cables around to make sure you don’t have a cable with a short or something? You are using unbalanced cables and not TRS ones right? Just thought I’d throw some ideas out there. Hopefully that power supply will fix it!!!

    Yep tried different patch cables and put it in various places in the chain, even hooked it up by itself between my amp and guitar. What concerns me is others are having the same exact problem with it apparently. They are just cheap Hosea or (forgetting) other patch cables, they are all in good shape though, using Dimarzio amp/guitar cables.

    in reply to: Small Clone/Big Muff problems #101871
    CaptainHook
    Participant
    Quote:
    Quote:
    No pedal should crap out in 2-3 days of very light use, I barely touched the thing.

    Frustrating. $80 down the drain possibly.

    you’re right of course…it shouldn’t.

    …..all I can say is after ‘2 or 3 days light use’ it would be going straight back to the shop for a replacement or to seek a refund, personally I wouldn’t even bother messing around with any other course of action when I’ve had it less than a week.

    Thanks, yeah I bought it new from an Ebay dealer for a bit less, but they didn’t include the warranty card, just the return info sheet in the box (it was new – at least it sure looks that way).

    In any case, ugh, I just bought an adapter for it from GC and will see if that works, as I’ll use it for a Big Muff Pi down the road any ways probably, and see if that helps the Small Clone first.

    in reply to: Small Clone/Big Muff problems #101869
    CaptainHook
    Participant
    Quote:
    It’s a power problem. These pedals are True Bypass which is why the sound is cutting off when you step on them. If they have no power and you complete the circuit there will be no sound!!! I would try a power supply and also check the wires on the 9V batter clip (as these come loose and even detach themselves often). You will need to cut and pull back the black sleeve to make sure they are still attached and/or aren’t touching the other’s metal connection causing it to ground out. I wouldn’t give up though, as this can happen and it doesn’t mean the pedals are fried!!!

    Also, if you leave your instrument cables in these it will drain the batteries whether you are using them or not, so it could be killing your batteries.

    Ok thanks for the reply. I won’t give up on it yet (or EHX – I own a Holy Stain I just bought also).

    I also love the sound of the Small Clone.

    I am running the Small Clone on battery power, since it did not come with an EHX or compatible adapter, nor do I have one that fits it. Under certain configurations on my chain, the light does come on (albeit dimmer looking than before I believe), but it still just acts as a bypass and nothing else.

    I have a one spot connected to a few Boss pedals and the Holy Stain and a boutique Overdrive pedal.

    So would the patch cables also drain from it’s power even when everything is turned off? I am using the default battery that came with it – guess i’ll try a new battery first, which I haven’t done.

    Thanks again.

    in reply to: Small Clone/Big Muff problems #101864
    CaptainHook
    Participant

    Yeah I’m pretty darn disappointed with this pedal and EHX for the first time.

    I’ve seen this problem come up in multiple posts with no public solution or identified cause.

    No pedal should crap out in 2-3 days of very light use, I barely touched the thing.

    Frustrating. $80 down the drain possibly.

    in reply to: Small Clone/Big Muff problems #101856
    CaptainHook
    Participant

    I have the exact same problem with my Small Clone. Worked fine in the middle of my chain, now it’s just a big mute pedal, press the button, light doesn’t come on in most configs, and it just cuts the signal altogether to my amp/guitar. Press it again and the sound is back for everything in the chain other than the Small Clone. WTH?

    I’ve had this all of 3 days now.

    Please tell me this is not the only thread regarding this issue! It’s obviously a problem with the pedal.

    I can say that I’m using an EHX Holy Stain effects box, WAH pedal, DS-2 Distortion, Boutique analog overdrive pedal, DD-6 Delay pedal, Boss Loop pedal, and a Boss Noise Supressor.

    I’m having a hell of a time figuring out what’s the best place for the Holy Stain, and I’ve had enough fiddling for the night, and decided to post here just in case someone has any help.

    Of course the Ebayer I ordered the pedal from new, didn’t include a warranty card, but everything else.

Viewing 13 posts - 1 through 13 (of 13 total)