Forum Replies Created

Viewing 15 posts - 1 through 15 (of 21 total)
1 2
  • Author
    Posts
  • December 8, 2010 at 9:49 am in reply to: Headphone AMP not simulating cabinet? #112971
    boytbpc
    Participant
    Quote:
    If it doesn’t say “speaker simulation” then you you shouldn’t expect it.

    What’s with the attitude? Melx is bringing up great points and your riding his ass for it.

    March 26, 2009 at 7:38 pm in reply to: EHX Mod Pages #94947
    boytbpc
    Participant

    wow

    March 26, 2009 at 3:34 pm in reply to: EHX Mod Pages #94928
    boytbpc
    Participant

    I did the resistor mod and emitter mod on my big muff pi. I also installed a feedback loop. These mods made the BMP a lot more useable to me. I’m going to do the tone bypass mod and the swollen pickle mod later.

    This was the first time I have modded a Electro-Harmonix pedal, but I’ve modded a few Boss and Ibanez pedals, I’ve also worked on my Blues Junior. IMO, the EHX PCBs are the cheapest I’ve ever seen and the wires from the controls are the thinnest, crappiest, cheapest, POS I’ve seen in a pedal. That said, EHX pedals sound awesome, so they are doing something right.

    I’ve never had a trace pull up on me until this weekend, and everyone of them I touched practically fell off the board. In the end I superglued them all back on and the Creamy Dreamer Muff w/ Feedback Loop sounds tits.

    Boytbpc

    March 19, 2009 at 1:49 am in reply to: EHX Mod Pages #94648
    boytbpc
    Participant

    Well, I finally traded my Little Big Muff Pi for a Big Muff Pi. Mods are happening this weekend.

    February 20, 2009 at 3:52 am in reply to: EHX Mod Pages #93644
    boytbpc
    Participant

    Thanks Ned

    December 31, 2008 at 4:13 pm in reply to: EHX Mod Pages #89886
    boytbpc
    Participant

    I’ve been linked in a stickied thread. I feel so happy. :) I’m no longer a complete noob. :)

    December 16, 2008 at 9:01 pm in reply to: EHX Mod Pages #89117
    boytbpc
    Participant

    Works for me.

    December 6, 2008 at 5:05 pm in reply to: EHX Mod Pages #88572
    boytbpc
    Participant

    Resistor Mod for Big Muff Pi.

    I know most people increase the resistors as part of the Creamy Dreamy mod. Does anybody know what value to replace them with? Thanks,

    December 5, 2008 at 9:10 pm in reply to: Switchblade between 2 amp channels and fx pedals #88533
    boytbpc
    Participant

    Hi Dagan,

    Are you running your channels on your Twin noticeably different, or are you using the switchblade as a looper?

    December 4, 2008 at 4:08 pm in reply to: EHX Mod Pages #88417
    boytbpc
    Participant

    updated the list. Enjoy

    December 3, 2008 at 5:13 pm in reply to: I may get ran out of town for asking this… #88261
    boytbpc
    Participant
    Quote:
    Quote:
    Quote:
    Usually I’ll mess around with the big muff, do an emitter mod and change out the switch.

    What is the Emitter mod?

    It’s one of the easiest muff mods to do.

    “Emitter mod: The 2 gain stages of the Muff are tied to the groud by emitter resistors (R12 & R16). These are 390 ohms in Russian models and 100 ohms in NYC models (exact value can differ between models). Jumpering these resistors (replace resistors with a wire) will increase “gainy-ness” of the unit, enlarging em will reduce the “gainy-ness” of the unit. A potmeter can be used to control this value although I noticed I usually used only one setting.”

    :)

    Install that with a 2p2t and have the best of both worlds.

    December 3, 2008 at 4:38 pm in reply to: Hi, thought I’d introduce myself #88227
    boytbpc
    Participant

    Were you the man who stole my POG? ;)

    December 3, 2008 at 4:36 pm in reply to: Welcome new friends to the forum!! #88226
    boytbpc
    Participant

    Was this invite only up until a few days ago?

    December 3, 2008 at 3:28 pm in reply to: EHX Mod Pages #88200
    boytbpc
    Participant
    Quote:
    Nice links, thanks. I’ll especially be taking a closer look at the Small Stone ones. :)

    By the way, for posting a link with a space in it, it works if you wrap URL-tags around the link, like so:
    http://www.student.ru.nl/r.kerkhof/Taas/Mods/Big Muff.htm

    Press the quote button next to my post if you want to see what it looks like.

    Alternatively you can do the same by pressing the button in the row of buttons over the textfield where you write posts.

    Thanks,

    Linked fixed!

    December 3, 2008 at 2:57 pm in reply to: EHX Mod Pages #88191
    boytbpc
    Participant
    Quote:
    Quote:
    Big Muff Pi:

    http://www.student.ru.nl/r.kerkhof/Taas/Mods/Big Muff.htm

    Nice set of links that will come in handy, I’m sure. The Big Muff link doesn’t work because of the space so just copy and paste it.

    Yeah, sorry about the Big Muff link, anybody know how to fix it? I’ve tried copying and pasting or typing it in.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 21 total)
1 2