I did and they replied that the canyon doesn’t like daisy chains. After a little research I found out that the problem is the power the pedal gets. My psu gives 9.2V while the ehx one supplies almost 9.8V. The specs in the leaflet say that’s the pedal needs 9V/150mA which I believe is wrong. Supplying the pedal with 9.5V-9.8V does the trick, but anything below that threshold causes the issue. Don’t get me wrong the pedal is amazing but it does *not* work on 9V. The specs are wrong. The difference is insignificant but I guess it’s the little extra juice the processor needs to run its script.