Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 5, 2012 at 12:04 pm in reply to: Graphic Fuzz + Germanium Big Muff #118362
    andros77
    Participant

    thank you!

    after some weeks of sperimentation, I can say that the two are not so well combinable.
    So far I have tried to put the GF before, because I wanted to use it as a clean sustainer/compressor in the clean tones. Well, it doesn’t really work as a compressor, even if you set the dynamic at lowest level.
    Graphic fuzz distortion is quite heavy: level of distortion it is not so progressive, but at high level works fine with a boost/overdrive before (infinite sustain, fuzzy tone, similar to a big muff but less muddy).
    So the light overdrive of the Germanium may result as the propeller. Still need to try this combination.
    I don’t think the GF could be a good booster/overdrive if the fuzz is on, too heavy. With the fuzz switched off, well it could work as EQ booster. The EQ is very responsive, incredibly responsive, I’m still learning how to use it because it’s my first EQ.

    hope it helps!

    regards

    May 29, 2012 at 12:35 pm in reply to: Post your Pedalboard #117642
    andros77
    Participant

    hello to everybody!

    This is a picture of my pedalboard, all true by pass, with neutrik patch cables.
    I’m on the way to introduce the POG2 (I thought to put it between the light overdrive/boost and the germanium) and the graphic fuzz (and I’ll put that instead of the little big muff.. I’m sad to leave it out cause the LBM is great, but sounds too similar to the distortion of the Germanium to me..)
    Suggestions on how to combine POG 2, Germanium big muff and graphic fuzz are really welcome!
    :-)

    May 29, 2012 at 8:26 am in reply to: Im I the only one who was dissapointed with the Memory Toy? #117640
    andros77
    Participant

    I have it since 1 year and it’s a great delay, very warm and clean.

    did somebody experienced problems with the modulation?

    I found this vid:

    http://www.youtube.com/watch?v=RvvlwnNg7iA&feature=results_video&playnext=1&list=PL6BD17FA055714340

    May 25, 2012 at 9:17 am in reply to: Boss BCB 60 with my pedals #117604
    andros77
    Participant

    very cool.. I would have put a graphic fuzz instead of boss eq, so you could use it also as fuzz..

    May 24, 2012 at 7:31 am in reply to: Graphic Fuzz, should I get one? #117593
    andros77
    Participant
    Quote:
    Will we have a new GraphicFuzz in July?

    Just looking at the “All Products” section and found this:
    “Graphic Fuzz

    EQ/Distortion/Sustainer – AVAILABLE July 2012″

    And the Hog has been Discontinued…

    wow.. can anyone confirm this??

    May 23, 2012 at 3:23 pm in reply to: Graphic Fuzz, should I get one? #117586
    andros77
    Participant

    Hello,

    I’m buying this pedal next week. I want to use it as clean EQ for my germanium big muff, and as Fuzz of course.
    I’m wondering, where should I put in my chain.
    Before the germanium? After it?
    Or, even before the wah, at the top of the chain (where a compressor would stay, and where you can equalize the signal of the guitar before the modulations/distortions.. but I don’t like this option)
    I would like to have the opinion expecially from people who have germanium big muff and graphic fuzz (I have the feeling that this is a great combination)

    THANK YOU!!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)