Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 6, 2009 at 4:03 pm in reply to: Help Needed – Hiss Debugger??? #96429
    a_d_s_r
    Participant

    As it understand it, EHX pedals – like those you mentioned, don’t like to be daisy-chained. If you do an experiment; take all the pedals off the board, and plug each individual unit into it’s own power supply on a power strip… Or surge protector… See if they still make that whiney hiss. Once you’ve determined that to be the issue, to continue to power each EHX pedal independantly, get a 1Spot power supply with the multi-connector cable. About $39.95 if I’m correct…

    May 6, 2009 at 6:28 am in reply to: Holy Grail + power supply? #96413
    a_d_s_r
    Participant

    I have a Voodoo Lab PP2+, but have both 250mA AC outs in-use by a DD-20 and an EHX Micro Pog… Is it possible to use one of the standard 100mA Boss-type outs on the PP2+ to power the Holy Grail +???

    Or, can I use one of the PP2+’s 250mA outs and daisy-chain the Micro Pog and HG+ together?

    Any help would be great…

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)