triparallel-f
triparallel-f
triparallel-1
triparallel-2
triparallel-3
triparallel-4
triparallel-v

Tri Parallel Mixer

Effects Loop Mixer / Switcher
A powerful effects creation and mixing hub with flexible controls for multiple configurations!

$159.70

Find a Dealer
Sound Clips
3 Big Muffs In Parallel
B9, C9 & KEY9 In Parallel
Dry Blend Great For Bass
XOR Mode Pedal Combination Switching
Menu
  • Tri Parallel Mixer | Effects Loop Mixer / Switcher
  • $159.70
  • Find a Dealer

Tri Parallel Mixer

DESCRIPTION

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).

  • Run up to three FX Loops in parallel and create sounds that are not possible by connecting effects in series
  • Switch seamlessly between FX Loops in XOR mode
  • Send one instrument out to three separate amplifiers
  • Mix three instruments into a single output
  • Power supply included

SPECIFICATIONS

Circuit
AnalogAnalog w/ Digital Control
Bypass
Buffered Bypass
Audio
Mono
Effects Loop
Yes
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
45mA
Year Released
2019
UPC
683274012117
Owner's Manual
INPUT JACK
The signal present here will be outputted to an active channel’s SEND jack. In master bypass, the input signal connects directly to the OUTPUT jack.
OUTPUT JACK
The master output.
MASTER VOLUME
Sets the master output level of the mixer.
DRY VOL
Sets how much dry signal is sent to the output.
RETURN KNOB
Sets the level of the signal received at the RTN jack before it is sent to the output.
SEND KNOB
This knob sets the level outputted to the SEND jack.
EQ
This knob affects the tonal characteristic of the signal inputted to the RTN jack.
PHASE
Inverts the phase of the signal sent out of the SEND jack.
SEND 1/2/3 JACK
Outputs the signal inputted when its channel is active.
RTN 1/2/3 JACK
This jack is the input for a given channel.
CH 1/2/3 FOOTSWITCH
This switch is used to activate/deactivate a given channel. Double tap any of these switches to enter bypass mode.

“EHX's Tri Parallel Mixer gives you mastery over FX loops.”

–Guitar Magazine

Related Gear


Find a Dealer