- This topic has 3 replies, 3 voices, and was last updated 10 years, 7 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Where to find a replacement Color switch for Small Stone…?
Hi folks,
The plastic slider in the Color switch on my Small Stone snapped off, so I need to replace it. In looking for a new one (mainly @ Mouser), I haven’t come across any models that seem to match the original. Any advice? Where can I find a matching replacement (DPDT On-On 0.5A/125V DC [so says the original…])?
Thanks!
JB
This is an exact replacement: http://www.smallbearelec.com/Detail.bok?no=37
Brilliant – thank you!!
JB
I replaced my color switch with a DPDT on-on as described, but it does not seem to function properly. When “off” the phaser seems to suffer from a precitious drop in one of the phases (it gets muddy at one point in the “swoosh”) and when its “on” it cuts off entirely.
I wired the switch directly to the main PCB (i.e. removed the 6-pin ribbon cable and connected the switch via hookup wire to the PCB pin corresponding to the little switch PCB…. at least according to a physical trace of the switch PCB.
Is there something else happening on that little mini-PCB the original switch is wired into? I’m working with a version 4 reissue SS btw. Thanks for any info.