- This topic has 4 replies, 4 voices, and was last updated 13 years, 7 months ago by .
Viewing 5 posts - 1 through 5 (of 5 total)
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Voice Box Setup & Reverb Mic Bypass question
I have two questions about the Voice Box.
1. I am using the Voice Box with a Eurorack UB802 mixer. COuld anyone familiar with this setup walk me through the best way to connect the two (i.e. which inputs/outputs to use on the UB802)? I have been getting mixed results.
2. Is there a way to keep the reverb effect from the Voice Box even when the mic bypass is activated?
Thanks!
Turn the reverb knob (right next to blend) up for reerb on just your dry (bypassed) signal. The other reverb knob is for the effect signal. Try putting the voicebox into a DI before the mixer. The voicebox is pretty hot, so you can use the DI to pad it down.
Hope that helps
TGM
This might show my ignorance….but what’s a DI?
Thanks for your help!
I got a rocktron voice box, look at the mixers, with what u have I would plug the V-box into trk #1, use the aug send fx knob set to 12 to 3 clock, use the red knob to control the amount of fxs ur looking for, hope this helps
Thanks for your help!
Direct Inject/Input Box, it’s an impedance thang.