Home › Forums › Help/Technical Questions › Voice Box problem?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 10, 2010 at 2:39 am #80715
    rempell
    Member

    Hello!
    I just purchased a Voice Box pedal today. I’m sure you’re familiar with it. I opened ‘er up, set it up to run a mic in and out to an amp, and an instrument into the 1/4″ and out into a separate amp. It worked power wise, but the knobs did nothing to the sound. Later, after being frustrated and unplugging it, I set it up after and received no power to the device. No lights or anything. I have no idea what’s wrong I’ve checked and triple checked connections and the cables are not bad and the power source is fine. I dunno what’s wrong. Did I get a bad pedal? Any help would be fantastic.

    September 10, 2010 at 4:59 pm #111335
    B.Daws
    Participant

    Did you try making sure you don’t have the “mic bypass” clicked(left foot switch). Also you have to make sure the blend is at 50% or so as most of the knobs only affects the wet signal.

    September 10, 2010 at 6:25 pm #111338
    rempell
    Member

    Okay that might be the problem with the pedal once it’s on but I currently can’t get power to the thing..

    September 14, 2010 at 11:03 pm #111423
    rempell
    Member

    Does anyone have ideas as to why my pedal won’t turn on? How efficient is the warranty/return service with Electro Harmonix?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.