Home › Forums › Help/Technical Questions › Voice Box Effects Output

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 4, 2009 at 1:48 pm #79458
    CarlVarney
    Participant

    I recently ordered a Voice Box as a gift for someone, and because I don’t know much about electronics, I thought maybe you folks could help me out.

    The Effects Output is XLR, and the person I bought the gift for doesn’t have a mixer or on-stage breakout box as the instructions suggest.

    My question is: Can they still get it plugged into an amplifier using an XLR to 1/4″ adapter or cable? Or, do I need to return the gift?

    Thanks!

    December 4, 2009 at 2:45 pm #104810
    B.Daws
    Participant

    The thing is you will need two amplifiers if you want the instrument and vocal sound. The instrument out is a standard 1/4″. There should be no problem running a XLR to 1/4″ for the Mic since the VoiceBox is a preamp too!

    December 4, 2009 at 5:01 pm #104816
    electro-melx
    Moderator

    well, it needs to run into something…. do you know what he usually uses to run his vocals into? If it’s for recording he can run the vocal output into whatever he uses, if it’s a PA he can run it straight into that… (using an xlr to jack if need be.

    December 4, 2009 at 5:11 pm #104817
    bill ruppert
    Participant

    Yes a XLR to 1/4″ adapter is what I use and it works just fine.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.